Zum Inhalt springen

WSAL24780 – Wireless-AW-CB375NF/en

Aus JW Tech Wiki

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The AW-CB375NF is an NGFF (M.2 A/E Key) wireless NIC with 2.4 GHz/5 GHz dual-band Wi-Fi 5, an RTL8822CE-CG chipset, and integrated Bluetooth 5.0/BLE. It targets users who need a compact wireless module for Linux-based embedded systems.

Related products at JW Tech

Technical overview

  • Interface: NGFF (M.2 A/E Key)
  • Wi-Fi: 2.4 GHz / 5 GHz dual band; up to 300 Mbps on 2.4 GHz and up to 867 Mbps on 5 GHz
  • Protocols: IEEE 802.11ac/m MIMO OFDM, two transmit and two receive paths
  • Bluetooth: 5.0 standard, backward compatible with 2.1+EDR, supports BLE
  • Operating systems: Linux (kernel ≥ 5.10), Windows 10/11
  • Supported platforms per source: Jetson family (Xavier NX, Orin Nano/NX – plug-and-play); Raspberry Pi 5 requires manual driver installation

Commands and examples – verify before use: 

git clone https://github.com/lwfinger/rtw88
cd rtw88 && make && sudo make install
echo "dtoverlay=pcie-32bit-dma-pi5" >> /boot/firmware/config.txt
sudo reboot
ifconfig -a
sudo modprobe rtw_8822ce
dmesg | grep rtw
lsmod | grep rtw
sudo modinfo rtw_8822ce

Notes and version constraints

  • The source states that technical support is currently only available for Jetson motherboards; support status for other boards is unclear.
  • Only Linux kernel version 5.10 or higher is supported; older kernels are not compatible.
  • On Windows, only Windows 10/11 are supported; other Windows versions are not supported according to the source.
  • The step-by-step instructions target the Raspberry Pi 5; whether they apply to other machines must be verified before use.
  • The source contains no information about warranty, certifications, or safety compliance.

Source and revision record