WSAL22520 – 10.1inch Capacitive Touch LCD (F)/en
Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.
Summary
The panel is a 10.1-inch IPS display with capacitive touch, 1024 × 600 resolution and toughened glass.
Related products at JW Tech
Technical overview
- Resolution: 1024 × 600 pixels
- Panel type: IPS with capacitive touch input
- Toughened glass front cover
- LVDS interface uses the RGB888 data format
- Supported development boards: OpenH743I-C and Open746I-C
- By default, a same-direction FFC cable is used; the screen driver board's RGB interface contacts the gold fingers downward
- When using an opposite-direction FFC cable, the STM32 RGB interface connects downward
Notes and version constraints
- Note: The resistor position must be correct; incorrect connection may cause the screen to not respond to touch and, in severe cases, can burn the motherboard and screen.
- The hardware connection depends on cable orientation and may require modifications for other boards.
- Only the listed STM32 development boards are explicitly supported; other types need custom adaptation.
Source and revision record
- 10.1inch Capacitive Touch LCD (F) - Waveshare Wiki
- Source revision: 100562
- Captured: 2026-09-03T04:06:54+00:00
- SHA-256:
91a003bc9ced1da9df603c8a100aa8c9bcc4a84b1d1879fee98192d09d2d67f1