Zum Inhalt springen

WSAL14410 – 5.83inch e-Paper HAT/en

Aus JW Tech Wiki

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The 5.83inch e-Paper HAT is an E-Ink raw display with a resolution of 648 × 480 pixels and black-and-white rendering. It is driven over the SPI signal protocol and can be connected directly to Raspberry Pi, Arduino UNO R3, Jetson Nano, RDK X3, STM32 (via STM32CubeMX), and ESP32/ESP8266.

Related products at JW Tech

Technical overview

  • Resolution: 648 × 480 pixels
  • Color rendering: Black / White
  • Interface: SPI
  • Supported platforms: Raspberry Pi, Arduino UNO R3, Jetson Nano, RDK X3, STM32, ESP32/ESP8266
  • Available demos: C and Python examples for the listed platforms
  • Related products: WSAL14410 (raw display without PCB) and WSAL14597 (display HAT for Raspberry Pi)
  • Documentation covers parameters, operating principles, precautions, development demos, and resources such as datasheets

Notes and version constraints

  • No exact commands or code snippets are present in the source file – specific commands must be taken from the associated demo documents.
  • The source contains no information on power values, certifications, warranty, or safety requirements; these must not be invented.
  • Platform-specific connection details (pinout, voltage levels) are not specified in the provided source and require human confirmation.
  • The OS or firmware version of each platform may affect compatibility; this should be verified before deployment.

Source and revision record

Abgerufen von „https://wiki.jw-tech.eu/index.php?title=WSAL14410_–_5.83inch_e-Paper_HAT/en&oldid=1618“