Zum Inhalt springen

WSAL13859 – 13.3inch HDMI LCD (H) (with case)/en

Aus JW Tech Wiki

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

Capacitive IPS display with 1920×1080 resolution, case kit and 60° tilt stand; supports Raspberry Pi operation and PC monitor use via HDMI or VGA.

Related products at JW Tech

Technical overview

  • IPS panel with 1920×1080 resolution on a 13.3-inch display.
  • Toughened glass cover over the capacitive touch unit, rated at 6H hardness.
  • The case version includes a stand with an adjustable 60° tilt angle.
  • Connections: HDMI for video/audio, USB for touch recognition, VGA via a separate mini-HDMI-to-VGA cable, 3.5mm jack for audio output over HDMI.
  • Multi-language OSD menu for power management, brightness, and contrast.
  • Mounting holes on a 100×100 mm grid with M4 screws for wall mounting.
  • Built-in high-quality speaker removes the need for external speakers.
  • Supported operating systems: Raspberry Pi OS, Ubuntu, Kali, and RetroPie on the Pi; Windows 7/8/8.1/10/11 on a PC.
  • The no-case version lacks both VGA input and the stand function.
  • Two power connections: DC port at 12 V / ~0.6 A and USB touch port at 5 V / ~80 mA.

Commands and examples – verify before use:  

hdmi_group=2
hdmi_mode=82
hdmi_cvt 1920 1080 60 6 0 0 0
disable_splash=1
sudo apt-get install ddcutil -y
sudo ddcutil detect
sudo ddcutil setvcp 10 <value>
wget https://files.waveshare.com/upload/1/18/Evdev-right-click-emulation.zip
unzip Evdev-right-click-emulation.zip
cd evdev-right-click-emulation
sudo apt install build-essential libevdev2 libevdev-dev -y
sudo cp 'out/evdev-rce' '/usr/local/bin/'
sudo chmod +x '/usr/local/bin/evdev-rce'
sudo evdev-rce
sudo usermod -G 'input' -a pi
echo 'uinput' | sudo tee -a /etc/modules
KERNEL=="uinput", MODE="0660", GROUP="input"
sudo udevadm control --reload-rules
sudo udevadm trigger
sudo reboot
evdev-rce
sudo mkdir ~/.config/autostart

Notes and version constraints

  • Editing the hdmi_ parameters in config.txt is version-dependent; newer Raspberry Pi OS releases may use a different file layout – verify against current documentation before saving.
  • Long-press right-click emulation requires a 32-bit environment; 64-bit systems are not supported by default.
  • The PWM backlight experiment requires removing a transistor and soldering a PWM trace – intended for advanced users only.
  • VGA operation requires a separately purchased mini-HDMI-to-VGA cable; it is not included in the box.
  • The power supply specification (12 V/1 A, outer Ø 3.5 mm, inner Ø 1.35 mm) refers to the included adapter; any substitute must keep ripple within ±5 %.
  • In multi-monitor setups, setting this display as the primary screen is recommended; some PCs lack HDMI hot-plug support and may need a PC restart.
  • Automatic screen-off behavior depends on the OS; the official Raspberry Pi image blanks after roughly ten minutes of inactivity.

Source and revision record

Abgerufen von „https://wiki.jw-tech.eu/index.php?title=WSAL13859_–_13.3inch_HDMI_LCD_(H)_(with_case)/en&oldid=1898“