WSAL14410 – 5.83inch e-Paper HAT/en
Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.
Summary
The 5.83inch e-Paper HAT is an E-Ink raw display with a resolution of 648 × 480 pixels and black-and-white rendering. It is driven over the SPI signal protocol and can be connected directly to Raspberry Pi, Arduino UNO R3, Jetson Nano, RDK X3, STM32 (via STM32CubeMX), and ESP32/ESP8266.
Related products at JW Tech
- WSAL14410 – 5.83inch E-Paper E-Ink Raw Display, 648×480, Black / White, SPI, Without PCB
- WSAL14597 – 5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480, Black / White, SPI
Technical overview
- Resolution: 648 × 480 pixels
- Color rendering: Black / White
- Interface: SPI
- Supported platforms: Raspberry Pi, Arduino UNO R3, Jetson Nano, RDK X3, STM32, ESP32/ESP8266
- Available demos: C and Python examples for the listed platforms
- Related products: WSAL14410 (raw display without PCB) and WSAL14597 (display HAT for Raspberry Pi)
- Documentation covers parameters, operating principles, precautions, development demos, and resources such as datasheets
Notes and version constraints
- No exact commands or code snippets are present in the source file – specific commands must be taken from the associated demo documents.
- The source contains no information on power values, certifications, warranty, or safety requirements; these must not be invented.
- Platform-specific connection details (pinout, voltage levels) are not specified in the provided source and require human confirmation.
- The OS or firmware version of each platform may affect compatibility; this should be verified before deployment.
Source and revision record
- 5.83inch e-Paper HAT - Waveshare Wiki
- Source revision: 103814
- Captured: 2026-08-30T04:16:25+00:00
- SHA-256:
a22c52ca7e9ef1d99934a9a33a2993bb1de4e69fdacc9cd155d34a21c899efa7