Quelltext der Seite WSAL24484 – 10.1HP-CAPLCD Monitor/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The 10.1HP-CAPLCD Monitor is a 10.1-inch capacitive touch monitor with an IPS panel, 1280×800 resolution and an optically bonded toughened glass panel. It provides standard HDMI and full-featured Type-C display interfaces plus a 5V Type-C power input.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL24484 WSAL24484 – 10.1inch Capacitive Touch Display, Wide Color Gamut, 1280×800, Optical Bonding Toughened Glass Panel, HDMI/Type-C Display Interface]

== Technical overview ==
* Wide color gamut IPS panel (82% NTSC), max. brightness 350 cd/m², contrast 800:1, refresh rate 60 Hz.
* 10-point capacitive touch behind a 6H-hardness toughened glass panel; optical bonding improves display quality.
* Connectors: standard HDMI for video, USB for touch input, and full-featured Type-C for display signal and power (5V).
* Power via 5V Type-C jack; rated voltage 5.00 V (tolerance 4.75–5.25 V), input current min. 750 mA / rated 800 mA.
* Operating temperature range 0–60 °C, storage temperature range −10–70 °C; avoid prolonged exposure to hot, humid environments.
* Supported operating systems: Windows 11/10/8.1/8/7 as a PC monitor, and Raspberry Pi OS, Ubuntu, Kali and RetroPie on Raspberry Pi.
* Multi-language OSD menu; brightness/contrast adjustable via OSD menu or DDC/CI software (e.g., Twinkle Tray on Windows, ddcutil on Linux).
* Dimensions: overall 241.00(H) × 149.00(V) × 11.80(D) mm; display area 135.36(H) × 216.58(V) mm; weight 809 g; power consumption 4 W.

'''Commands and examples – verify before use:''' 
<syntaxhighlight lang="text">
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1280 800 60 6 0 0 0
hdmi_drive=1
sudo apt-get install ddcutil -y
sudo ddcutil detect
sudo ddcutil setvcp 10 <value>
</syntaxhighlight>

== Notes and version constraints ==
* The EDID sequence parameters (pixel clock 77.00, H/V addressable 1280/800, etc.) are only needed if the main control board cannot auto-detect EDID; otherwise manual configuration can be skipped.
* When used with a PC, the screen may flicker if USB power is insufficient; connecting an external 5V/1A adapter to the power port restores normal operation.
* On Raspberry Pi, the resolution must be manually set in config.txt; otherwise the display will show at an incorrect resolution.
* Input current below 750 mA causes start-up failure or abnormal display; remaining in that state for a long time may permanently damage the monitor.
* For one-cable connection, the master device must support a full-featured Type-C interface and wired projection; otherwise the link will not work.
* The maximum input current value in the spec sheet is still TBD; please confirm with the manufacturer.
* DDC/CI brightness adjustment requires a supported monitor; whether Twinkle Tray or ddcutil works depends on your driver/kernel version — test beforehand.

== Source and revision record ==
* [https://www.waveshare.com/wiki/10.1HP-CAPLCD_Monitor 10.1HP-CAPLCD Monitor - Waveshare Wiki]
* Source revision: 110887
* Captured: 2026-09-04T04:23:15+00:00
* SHA-256: <code>fed1c8af7f075dd60a7ebf506712a0824756dc8530c435a21974e9d5210f835c</code>