Quelltext der Seite WSAL24359 – JETSON-ORIN-IO-BASE-B/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The JETSON-ORIN-IO-BASE-B is a Waveshare base board for the NVIDIA Jetson Orin Nano and Orin NX modules. It provides two Ethernet ports, a USB-C data port, and DC power via a round connector. The guide covers booting with or without a display, firmware updates to the “Super” versions, and system flashing via SDK Manager or script.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL24359 WSAL24359 – Waveshare Jetson Orin Nano / NX Super Dual Ethernet Base Board, Based On Jetson Orin Nano And Jetson Orin NX Module]

== Technical overview ==
* Compatibility: The board accepts the NVIDIA Jetson Orin Nano (8 GB/16 GB) and Jetson Orin NX modules.
* Connectors: Two Ethernet ports, USB-C for data transfer, and a round DC power input; a power adapter is required separately.
* Default login: Without pre-set credentials, users log in via serial port using PuTTY; when credentials are pre-installed, both username and password default to “jetson”.
* Firmware upgrade to Super: Official kits can be updated directly to JetPack 6.1 (rev1); core modules and Waveshare kits require the official upgrade firmware from NVIDIA starting in January.
* Flashing prerequisites: Ubuntu 20.04 or 22.04 as host or VM; enter recovery mode by shorting FC REC and GND under the module, then connect via USB data cable.
* Two installation paths: Through the SDK Manager (interactive) or via script using L4T resources from the download center.
* Script commands cover downloading and extracting L4T packages, installing dependencies, optionally presetting username/password, and flashing to NVMe or TF card.
* After flashing: Remove the jumper, connect a monitor, and reboot; with preconfig the system boots straight into the desktop environment.
* SDK installation on the board: Use “sudo apt-get update” and “sudo apt-get install nvidia-jetpack” to install SDK components later.
* Fan control: With jetson-stats (“jtop”), fan speed can be adjusted in the manual profile.

'''Commands and examples – verify before use:''' 
<syntaxhighlight lang="text">
sudo dpkg -i sdkmanager_1.6.1-8175_amd64.deb
sudo apt --fix-broken install
sudo mkdir orin_nano
cd orin_nano
wget https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v4.3/release/Jetson_Linux_r36.4.3_aarch64.tbz2
wget https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v4.3/release/Tegra_Linux_Sample-Root-Filesystem_r36.4.3_aarch64.tbz2
sudo tar xf Jetson_Linux_r36.4.3_aarch64.tbz2
sudo tar xpf Tegra_Linux_Sample-Root-Filesystem_r36.4.3_aarch64.tbz2 -C Linux_for_Tegra/rootfs/
cd Linux_for_Tegra/
sudo ./tools/l4t_flash_prerequisites.sh
sudo ./apply_binaries.sh
sudo ./tools/l4t_create_default_user.sh -u jetson -p jetson1 -a
sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1p1 -p "-c ./bootloader/generic/cfg/flash_t234_qspi.xml" -c ./tools/kernel_flash/flash_l4t_t234_nvme.xml --showlogs --network usb0 jetson-orin-nano-devkit-super external
sudo apt-get update -y
sudo apt-get install nvidia-jetpack -y
sudo apt install python3-pip
sudo pip3 install jetson-stats
sudo reboot
jtop
</syntaxhighlight>

== Notes and version constraints ==
* The exact availability of the official NVIDIA upgrade firmware for the “Super” version depends on its release timing (from January).
* The URLs listed in the source text are examples of resource packages; actual versions may change.
* Flashing requires a working Ubuntu host or VM; virtual machines need extra configuration steps during the flash process.
* Selecting the wrong development board type in SDK Manager can lead to a faulty flash.
* Adjusting fan speed via jtop presupposes a successful installation of jetson-stats.

== Source and revision record ==
* [https://www.waveshare.com/wiki/JETSON-ORIN-IO-BASE-B JETSON-ORIN-IO-BASE-B - Waveshare Wiki]
* Source revision: 109516
* Captured: 2026-09-04T04:08:58+00:00
* SHA-256: <code>f2802dfac2796270fc5b54e1117bb68982771702fdc76451ef356359cee67a8a</code>