Quelltext der Seite WSAL22520 – 10.1inch Capacitive Touch LCD (F)/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The panel is a 10.1-inch IPS display with capacitive touch, 1024 × 600 resolution and toughened glass.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL22520 WSAL22520 – 10.1inch Capacitive Touch LCD (F), 1024 × 600, Toughened Glass, IPS Panel]

== Technical overview ==
* Resolution: 1024 × 600 pixels
* Panel type: IPS with capacitive touch input
* Toughened glass front cover
* LVDS interface uses the RGB888 data format
* Supported development boards: OpenH743I-C and Open746I-C
* By default, a same-direction FFC cable is used; the screen driver board's RGB interface contacts the gold fingers downward
* When using an opposite-direction FFC cable, the STM32 RGB interface connects downward

== Notes and version constraints ==
* Note: The resistor position must be correct; incorrect connection may cause the screen to not respond to touch and, in severe cases, can burn the motherboard and screen.
* The hardware connection depends on cable orientation and may require modifications for other boards.
* Only the listed STM32 development boards are explicitly supported; other types need custom adaptation.

== Source and revision record ==
* [https://www.waveshare.com/wiki/10.1inch_Capacitive_Touch_LCD_(F) 10.1inch Capacitive Touch LCD (F) - Waveshare Wiki]
* Source revision: 100562
* Captured: 2026-09-03T04:06:54+00:00
* SHA-256: <code>91a003bc9ced1da9df603c8a100aa8c9bcc4a84b1d1879fee98192d09d2d67f1</code>