WSAL27439 – JETSON-ORIN-POE-MODULE/en
Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.
Summary
Compact IEEE 802.3af-compliant PoE expansion board that supplies both network and power to NVIDIA Jetson Orin Nano/NX over a single Ethernet cable.
Related products at JW Tech
Technical overview
- Category: PoE expansion board for NVIDIA Jetson Orin Nano/NX in a mini body
- Compatibility: suitable for Jetson Orin Nano and Jetson Orin NX
- PoE power input: 37 V to 57 V
- Output: 12 V / 2.1 A DC
- Network standard: supports IEEE 802.3af/at PoE
- Dimensions: 21 × 92 mm
- Fully isolated switched-mode power supply (SMPS) onboard
Notes and version constraints
- The transformer gets hot during operation – do not touch it.
- An additional cooling solution is recommended.
- The PoE pin header on the Orin baseboard must be pre-soldered before connecting the PoE module.
- Installation: remove screws at the mounting holes and secure with matching copper standoffs.
Source and revision record
- JETSON-ORIN-POE-MODULE - Waveshare Wiki
- Source revision: 84841
- Captured: 2026-08-29T08:24:42+00:00
- SHA-256:
729759e213a064914da508bbe51521f72b89f0e9b8f533e8df6e3face9579b2f