WSAL22609 – 3.52inch e-Paper HAT/en

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The 3.52inch e-Paper HAT is a raw display with a resolution of 360 × 240 pixels and an SPI interface. It can be used with various platforms such as Raspberry Pi, Arduino, Jetson Nano, RDK X3, STM32 and ESP32/8266.

Related products at JW Tech

• WSAL22609 – 3.52inch e-Paper raw display, 360 × 240, SPI Interface
• WSAL22698 – 3.52inch e-Paper HAT, 360 × 240, SPI Interface

Technical overview

• Resolution: 360 × 240 pixels
• Interface: SPI
• Compatible with Raspberry Pi, Arduino, Jetson Nano, RDK X3, STM32 and ESP32/8266
• Available as a HAT module for direct connection to the GPIO header
• Demos available in C, Python and platform-specific environments

Notes and version constraints

• Exact electrical values (voltage, current draw) are not provided in the supplied text; please consult the manufacturer's datasheet.
• Firmware versions and driver updates may affect compatibility; check the latest documentation before use.
• For correct wiring and pin mapping, refer to the official Waveshare documentation.

Source and revision record

• 3.52inch e-Paper HAT - Waveshare Wiki
• Source revision: 103821
• Captured: 2026-09-03T04:11:49+00:00
• SHA-256: b395bedef36e981d6db316224d7232a0d0daeba7e608caf3bc7c659bceb7fbdf