Zum Inhalt springen

WSAL21020 – 10.1inch HDMI LCD (G) (with case)/en

Aus JW Tech Wiki

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The 10.1-inch display is a capacitive touch screen with an IPS panel, 1920×1200 resolution, optical bonding and 10-point touch. It supports Raspberry Pi, Jetson Nano and PC via HDMI and USB.

Related products at JW Tech

Technical overview

  • IPS panel with a 10.1-inch diagonal and a resolution of 1920 × 1200 pixels.
  • Capacitive 10-point touch control with toughened glass, hardness up to 6H.
  • Supports Raspberry Pi OS, Ubuntu, Kali and Retropie when used with a Raspberry Pi.
  • Suitable as a computer monitor for Windows 11/10/8.1/8/7.
  • Multi-language OSD menu for power control and brightness/contrast adjustment.
  • 3.5 mm headphone jack with support for HDMI audio output and built-in high-fidelity speaker.
  • 5 V output at 3 A capacity, can power e.g. a Raspberry Pi.
  • Universal wall mount with a 75 × 75 mm hole pattern (M4 screw) on the back.
  • Includes a tilt stand in the delivery scope.
  • Current refresh rate of the display is 60 Hz.

Commands and examples – verify before use: 

hdmi_group=2
hdmi_mode=68
disable_splash=1

Notes and version constraints

  • The exact version of the operating system may affect the need for manual upgrades; please check before startup whether the system supports the required drivers.
  • When using with a Raspberry Pi, the resolution must be configured manually, otherwise the display may not work correctly.
  • Some PCs do not support plug-and-play for HDMI devices; however, it should work after a reboot.
  • PWM backlight adjustment is not supported.
  • For the autostart of the evdev-rce service, the permissions for user 'pi' must be set correctly, otherwise it will not start automatically.

Source and revision record