Zum Inhalt springen

WSAL20869 – RPi FPC Camera (B)/en

Aus JW Tech Wiki

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

Compact RPi camera with an OV5647 sensor, 5 MP and mini form factor. Connects via the CSI port; operated with rpicam-* or libcamera commands.

Related products at JW Tech

Technical overview

  • Sensor: OV5647, 5 MP
  • Mini form factor
  • Connects via the CSI port on the Raspberry Pi
  • Supported boards: all Raspberry Pi boards
  • Supported drivers: libcamera/Raspicam
  • Default: camera is auto-detected and enabled
  • Preview with rpicam-hello for about 5 seconds
  • Capture JPEG with rpicam-jpeg -o test.jpg
  • Resolution adjustable via --width/--height
  • Exposure control with fixed shutter speed and gain available

Commands and examples – verify before use:  

rpicam-hello
rpicam-hello -t 0
rpicam-jpeg -o test.jpg
rpicam-jpeg -o test.jpg -t 2000 --width 640 --height 480
sudo nano /boot/config.txt
sudo nano /boot/firmware/config.txt
dtoverlay=ov5647,cam1
sudo libcamera-hello -t 0
sudo libcamera-hello -t 0 --camera 1

Notes and version constraints

  • The source provides no explicit compatibility statement for this specific model beyond the general board list.
  • No pricing, stock, certification, or warranty information is present in the source.
  • Version-sensitive steps: On Bookworm configure /boot/firmware/config.txt; on older systems use /boot/config.txt.
  • For IMX290 on Pi 5 an extra JSON file must be added to the command directory – not directly applicable to the OV5647 module.
  • Auto-focus applies only to certain official cameras; unclear for this model.

Source and revision record

Abgerufen von „https://wiki.jw-tech.eu/index.php?title=WSAL20869_–_RPi_FPC_Camera_(B)/en&oldid=1296“