Zum Inhalt springen

WSAL19057 – PI400-KIT-13.3inch-UK/en

Aus JW Tech Wiki

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

Technical overview of the Raspberry Pi 400 kit combined with the Waveshare 13.3-inch HDMI touch display.

Related products at JW Tech

Technical overview

  • The Raspberry Pi 400 features a 1.8 GHz ARM Cortex-A72 processor, 4 GB LPDDR4-3200 RAM, dual-band Wi-Fi (2.4/5 GHz), Bluetooth 5.0/BLE, Gigabit Ethernet, two USB 3.0 ports and one USB 2.0 port.
  • The kit includes a 13.3-inch IPS display with 1920 × 1080 resolution, a tempered-glass capacitive touch panel (6H hardness) and built-in speakers.
  • Kit interfaces: Type-C power input (requires a 5 V / 3 A adapter), 40-pin GPIO header, micro SD card slot, and two micro HDMI outputs supporting up to 4Kp60.
  • Overall system dimensions: 286 mm × 122 mm × 23 mm (maximum).
  • The display supports HDMI, VGA and 3.5 mm audio output; VGA requires an additional adapter cable.
  • When used with Raspberry Pi, the screen resolution must be set manually in config.txt; otherwise the system default resolution is used.
  • On Windows PCs the display works plug-and-play via HDMI or VGA; when multiple monitors are connected, it is recommended to set the LCD as the primary monitor.
  • Wall mounting is possible through 100 × 100 mm fixing holes (M4); a 60° tilt-angle bracket is included.

Commands and examples – verify before use:  

xrandr
xinput
xinput map-to-output <touch ID> <HDMI-ID>
sudo apt-get install xserver-xorg-input-libinput
sudo mkdir /etc/X11/xorg.conf.d
sudo cp /usr/share/X11/xorg.conf.d/40-libinput.conf /etc/X11/xorg.conf.d/
sudo nano /etc/X11/xorg.conf.d/40-libinput.conf
sudo reboot

Notes and version constraints

  • For 90° display rotation on Raspberry Pi 4, the line 'dtoverlay=vc4-fkms-V3D' must also be commented out – version-sensitive step.
  • Exact xinput/xrandr IDs must be determined on site; example fixed values (e.g., 7, HDMI-1) are illustrative only.
  • Using VGA requires purchasing a mini-HDMI male to VGA female adapter cable; not included in the package.
  • Some PCs may only recognize HDMI devices after a system restart.
  • The HP audio output works only during HDMI communication.
  • When multiple monitors are connected simultaneously, the main-monitor cursor can only be controlled through the LCD; therefore configure the LCD as the primary monitor.

Source and revision record

Abgerufen von „https://wiki.jw-tech.eu/index.php?title=WSAL19057_–_PI400-KIT-13.3inch-UK/en&oldid=2006“