Zum Inhalt springen

WSAL13275 – 1.54inch e-Paper Module (B)/en

Aus JW Tech Wiki

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

Concise technical guide for the three-color 200x200-pixel E-Ink display module, covering integration with Raspberry Pi, Arduino, Jetson Nano, RDK X3, STM32 and ESP32/8266.

Related products at JW Tech

Technical overview

  • Resolution: 200x200 pixels, three-color E-Ink raw panel or display module.
  • Supported development environments: C and Python demos for Raspberry Pi, Jetson Nano and RDK X3; Arduino-based demos (UNO R3); STM32CubeMX-based demos; ESP32/8266 demos.
  • The wiki page includes sections on parameters, principles and precautions, plus resources such as documents, demos and datasheets.
  • An FAQ section covers frequently asked questions about e-paper displays.
  • Technical support is available through the Waveshare wiki.

Notes and version constraints

  • No specific commands or pin mappings are present in the source text; these must be taken from the respective demo projects.
  • Electrical parameters (voltage, current draw) are not given in the provided text and must not be invented.
  • Compatibility statements only cover the listed platforms; additional boards or firmware versions require human confirmation.
  • Version-sensitive steps (e.g., specific libraries or drivers) are not specified in the excerpt.

Source and revision record

Abgerufen von „https://wiki.jw-tech.eu/index.php?title=WSAL13275_–_1.54inch_e-Paper_Module_(B)/en&oldid=1946“