WSAL22609 – 3.52inch e-Paper HAT/en
Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.
Summary
The 3.52inch e-Paper HAT is a raw display with a resolution of 360 × 240 pixels and an SPI interface. It can be used with various platforms such as Raspberry Pi, Arduino, Jetson Nano, RDK X3, STM32 and ESP32/8266.
Related products at JW Tech
- WSAL22609 – 3.52inch e-Paper raw display, 360 × 240, SPI Interface
- WSAL22698 – 3.52inch e-Paper HAT, 360 × 240, SPI Interface
Technical overview
- Resolution: 360 × 240 pixels
- Interface: SPI
- Compatible with Raspberry Pi, Arduino, Jetson Nano, RDK X3, STM32 and ESP32/8266
- Available as a HAT module for direct connection to the GPIO header
- Demos available in C, Python and platform-specific environments
Notes and version constraints
- Exact electrical values (voltage, current draw) are not provided in the supplied text; please consult the manufacturer's datasheet.
- Firmware versions and driver updates may affect compatibility; check the latest documentation before use.
- For correct wiring and pin mapping, refer to the official Waveshare documentation.
Source and revision record
- 3.52inch e-Paper HAT - Waveshare Wiki
- Source revision: 103821
- Captured: 2026-09-03T04:11:49+00:00
- SHA-256:
b395bedef36e981d6db316224d7232a0d0daeba7e608caf3bc7c659bceb7fbdf