Zum Inhalt springen

WSAL22862 – USB-HUB-3U-ETH/en

Aus JW Tech Wiki
Version vom 6. September 2026, 08:04 Uhr von JWTechPublisher (Diskussion | Beiträge) (Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The USB-HUB-3U-ETH is an industrial-grade multifunctional USB hub that adds three USB 2.0/1.1 ports and a 100 Mbit/s Ethernet port via an RJ45 connector. It uses an integrated RTL8152B chip for network connectivity, features a rugged metal case with mounting holes, includes multiple protection circuits, and provides LED indicators for power, network, and USB status.

Related products at JW Tech

Technical overview

  • Extends the host by adding three USB output ports with a transmission rate of up to 480 Mbit/s (USB 2.0 High Speed).
  • An integrated 1-channel RTL8152B Ethernet chip enables 100 Mbit/s network transmission over the RJ45 port.
  • Each USB output supplies a maximum of 1.2 A; exceeding this limit triggers short-circuit protection and requires removing the device to reset it.
  • Protection circuits include over-voltage, over-current, short-circuit, over-temperature, reverse current, under-voltage lock-out, 8 kV ESD protection, and filtering.
  • LED1 through LED3 indicate the enumeration status of each USB port; the red PWR LED signals that power is on.
  • The orange network indicator flashes during normal network connection, while the green LINK LED remains steadily lit.
  • Operating temperature range is -40 °C to 85 °C without condensation; the module is not waterproof.
  • The enclosure is made of industrial metal and includes mounting holes for easy installation in control cabinets or industrial environments.

Notes and version constraints

  • No fixed IP address exists – configuration depends on the connected main control unit.
  • USB devices must be firmly seated, as a loose connection can prevent enumeration.
  • If an LED does not light up, verify that the connected USB device operates correctly and that drivers are installed on the computer.
  • The device does not support sharing USB ports over Ethernet; it functions solely as a USB network card.

Source and revision record

  • USB-HUB-3U-ETH - Waveshare Wiki
  • Source revision: 89703
  • Captured: 2026-09-03T04:27:41+00:00
  • SHA-256: 7709eeb3338865868450f08c249a1569467616a7dc99d4f00b3630aa06eb1be4