Zum Inhalt springen

WSAL22642 – OAK-D-S2/en

Aus JW Tech Wiki
Version vom 6. September 2026, 08:04 Uhr von JWTechPublisher (Diskussion | Beiträge) (Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The OAK-D-S2 is a compact AI vision kit featuring an Intel Myriad X chip, a 12MP color camera, and binocular depth cameras. It supports Python and C++ development as well as H.265 streaming.

Related products at JW Tech

Technical overview

  • Based on the OAK-D but more compact and lighter; the 5V power port present in the OAK-D has been removed.
  • Color camera: IMX378 sensor, 12 MP (4056 × 3040), 60 fps, autofocus from 8 cm to infinity.
  • Binocular monochrome cameras: OV9282 sensors, 1 MP each (1280 × 800), 120 fps, fixed focus from 50 cm or 19.6 cm.
  • Depth range: 0.7–12 m; theoretically up to 35 m, with about 6–10% measurement error at 30 m.
  • AI processor: Intel Myriad X with 4 TOPS of compute performance.
  • Video output: 4K/30 fps H.265 stream.
  • Interface: USB 3.0 Type-C for connection to computers or embedded hosts.
  • Supported development languages: Python and C++.
  • Metal enclosure; average power consumption approximately 2.5 W.
  • Supports common neural networks from the Caffe, TensorFlow, and MXNet platforms.

Commands and examples – verify before use: 

git clone https://gitee.com/oakchina/depthai.git
git clone https://gitee.com/oakchina/depthai-python.git
echo 'SUBSYSTEM=="usb", ATTRS{idVendor}=="03e7", MODE="0666"' | sudo tee /etc/udev/rules.d/80-movidius.rules
sudo udevadm control --reload-rules && sudo udevadm trigger
python3 -m pip install -r depthai/requirements.txt -i https://pypi.tuna.tsinghua.edu.cn/simple
python3 depthai/depthai_demo.py

Notes and version constraints

  • The Linux installation steps refer to the depthai package; no standalone installation path for the OAK-D-S2 was specified in the source text—please verify the correct version of the depthai package before implementation.
  • The source text contains no explicit safety warnings; laser and radiation aspects must be checked separately.
  • Compatibility with certain hosts (e.g., Jetson) requires prior configuration of the target system to avoid conflicts with OpenCV.
  • Version-sensitive steps: Installation via Gitee mirrors may vary by region or network environment; please confirm repository accessibility.
  • No prices, warranties, or certifications were mentioned in the source text; such details must not be added.

Source and revision record

  • OAK - Waveshare Wiki
  • Source revision: 89738
  • Captured: 2026-09-03T04:14:25+00:00
  • SHA-256: dcb2c8fa3c8b0cfe6539e80cb0d0f7176d53707fa529af4e33cb5d69d0966c36