WSAL22384 – PT-AF-2GT-60T-19B-6-A/en
Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.
Summary
The PT-AF-2GT-60T-19B-6-A is a ribbed aluminum timing pulley in the 2GT series with 60 teeth, a 19mm bore diameter, and four M3 mounting holes. It suits reduction-drive and automation applications.
Related products at JW Tech
Technical overview
- Material: Aluminum alloy
- Tooth type: 2GT
- Number of teeth: 60
- Flange outer diameter: 40.12 mm
- Teeth outer diameter: 37.68 mm
- Pulley thickness: 10 mm
- Inner bore diameter: 19 mm
- Mounting: Four M3 flat holes on a 28 mm pitch circle
Notes and version constraints
- Installing F6800ZZ flange bearings is recommended to distribute radial loads; exact installation must be verified on-site.
- Recommended belt length is 6mm; other lengths are not specified.
- Reduction group data (30T/20T/16T with 60T) refers to specific center distances; modifications require recalculation.
- No torque amplification factors or efficiency figures found.
- Version-specific procedural steps are missing; please consult manufacturer documentation.
Source and revision record
- PT-AF-2GT-60T-19B-6-A - Waveshare Wiki
- Source revision: 67834
- Captured: 2026-09-03T03:58:15+00:00
- SHA-256:
7e22be39351c8a9155ecd7fc072a1682a4f533f0b0e744c8095649256c7050df