Zum Inhalt springen

WSAL20734 – USB-HUB-4U/en

Aus JW Tech Wiki
Version vom 6. September 2026, 00:36 Uhr von JWTechPublisher (Diskussion | Beiträge) (Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The Waveshare USB-HUB-4U is an industrial USB hub with four USB 2.0 ports, ESD and over-voltage protection, and LED status indicators in a rugged metal enclosure.

Related products at JW Tech

Technical overview

  • Four USB-A output ports conforming to USB 2.0, data rate up to 480 Mbit/s.
  • USB-B input for connection to a computer or SBC; plug-and-play without driver installation on supported operating systems.
  • Input power via USB-B: 5 V; external DC jack for higher loads.
  • Each port can supply up to 1.2 A when sufficient power is available; without an external power source over USB 2.0 only about 490 mA per port is possible.
  • Protection circuits: over-voltage, over-current, short-circuit, over-temperature, reverse current, under-voltage lock-out, 8 kV ESD protection, and filtering.
  • Red PWR LED indicates hub power; LED1–LED4 light when the corresponding USB port is successfully enumerated.
  • Operating temperature range −40 °C to 85 °C, no condensation; the device is not waterproof.
  • Industrial-grade metal enclosure with mounting holes for easy installation.
  • Supported operating systems: Windows XP/7/8/8.1/10/11, macOS 8.6 or later, Linux kernel 2.4.20 or later.

Notes and version constraints

  • The exact geometry of the DC barrel connector (outer/inner diameter) must be verified before purchasing a replacement power adapter.
  • Without an external power supply, available output current is significantly reduced; an external 5 V / ≥4 A adapter is recommended for loads exceeding 1.2 A.
  • The device is not waterproof; moisture may trigger protection circuits or cause damage.
  • If the input voltage is too high, the protective circuit cuts off power directly.
  • If the USB LEDs do not light: first check the correct power adapter and test the peripheral directly on another PC to rule out a faulty device.

Source and revision record

  • USB-HUB-4U - Waveshare Wiki
  • Source revision: 85934
  • Captured: 2026-09-02T04:14:49+00:00
  • SHA-256: 239c1088f0f1a9d253ba4d34b879acf5f113e5478799fad0edfe93506c20265b