Zum Inhalt springen

WSAL20487 – Raspberry Pi Zero WH Package F/en

Aus JW Tech Wiki
Version vom 6. September 2026, 00:35 Uhr von JWTechPublisher (Diskussion | Beiträge) (Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

Package F combines the Raspberry Pi Zero WH (V1.3, without built-in WiFi) with a 1.3-inch LCD HAT and a UPS HAT (C). The LCD HAT provides a 240x240 IPS display over SPI; the UPS HAT offers 5 V output, LiPo battery management, and I2C monitoring.

Related products at JW Tech

Technical overview

  • Package contents: Raspberry Pi Zero WH (original V1.3 without WiFi/Bluetooth), 1.3-inch LCD HAT, and UPS HAT (C)
  • Raspberry Pi Zero WH: pre-soldered 40-pin GPIO header for easy use, based on the Raspberry Pi W
  • LCD HAT: 1.3-inch IPS display, 240x240 resolution, ST7789 driver, SPI interface, RGB color depth 65K, LED backlight, operating voltage 3.3 V
  • LCD HAT includes 1 joystick and 3 push buttons as input options
  • UPS HAT (C): output voltage 5 V, charger input 5 V, supports 803040 LiPo battery (1000 mAh, 3.7 V), dimensions 65 × 30 mm, mounting hole 3.0 mm
  • UPS HAT communicates via I2C for real-time monitoring of battery voltage, current draw, power, and remaining capacity
  • UPS HAT features multi-protection circuits: overcharge, over-discharge, overcurrent, and short-circuit protection
  • Raspberry Pi Zero WH uses the BCM2835 SoC with an ARM11 single-core CPU at 700 MHz and 512 MB memory
  • Video output supports PAL/NTSC as well as HDMI 1.3/1.4 with resolutions from 640x350 up to 1920x1200
  • Power is supplied via Micro-USB or pin header at 5 V

Notes and version constraints

  • The source is a supplier wiki; all specifications should be re-verified against current product datasheets before purchase or deployment
  • No exact compatibility lists, prices, stock levels, or certifications are included in the source – these must be confirmed separately
  • The Raspberry Pi Zero version in the package is the original V1.3 without built-in WiFi; if a newer variant is required, this must be clarified separately
  • I2C bus addresses and exact commands for the UPS HAT are not specified in the source
  • No warranty or safety statements are present in the source; these must not be inferred from it

Source and revision record

Abgerufen von „https://wiki.jw-tech.eu/index.php?title=WSAL20487_–_Raspberry_Pi_Zero_WH_Package_F/en&oldid=1726“