WSAL20591 – Pico-RGB-Matrix-P3-64x32/en
Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.
Summary
The Pico-RGB-Matrix-P3-64x32 is an RGB full-color display based on the Raspberry Pi Pico, featuring a 64×32 pixel panel (3 mm pitch, 2048 LEDs), integrated DS3231 RTC, light sensor, infrared receiver, buzzer and five buttons. It is suitable for desktop or wall-mounted display applications.
Related products at JW Tech
Technical overview
- RGB LED matrix: 64×32 pixels, 3 mm pitch, 2048 individual RGB LEDs
- Raspberry Pi Pico as main controller via standard header
- DS3231 RTC chip with battery holder (battery included) for accurate timekeeping when power is off
- Light sensor for automatic brightness adjustment and power saving
- Infrared receiver for wireless control via remote
- Embedded buzzer for alarms or hourly chimes
- Five buttons for configuration, reset, and programming
- Acrylic backplane and dimmer cover for improved appearance and comfort
Notes and version constraints
- The Pico must be purchased separately; a version with soldered headers is recommended for direct insertion
- To program via BOOTSET: press and hold, then press RESET to enter firmware download mode
- CircuitPython demos require prior installation of CircuitPython firmware on the Pico
- More precise technical details (e.g., power supply voltage, current draw) are not provided in the source – please verify in the datasheet
- Compatibility with other controllers (e.g., ESP32-S2-Pico) is mentioned, but no specific pin mappings for that combination were found
Source and revision record
- Pico-RGB-Matrix-P3-64x32 - Waveshare Wiki
- Source revision: 110848
- Captured: 2026-09-02T04:03:43+00:00
- SHA-256:
75b6120b0afe0e13114f28f7cd4cbf6733f7d1ceda04c30a3579844bc28bbca8