Zum Inhalt springen

WSAL21445 – SIM7600A-H 4G DONGLE/en

Aus JW Tech Wiki
Version vom 6. September 2026, 00:32 Uhr von JWTechPublisher (Diskussion | Beiträge) (Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The SIM7600A-H is an industrial-grade 4G dongle with GNSS positioning for North America (AT&T). It supports 2G/3G/4G, USB and UART connections, and TCP/UDP/HTTP(S)/MQTT via AT commands.

Related products at JW Tech

Technical overview

  • Supports 2G/3G/4G network connections and the protocols TCP/IP, IPv4/IPv6, Multi-PDP, FTP/FTPS, HTTP/HTTPS, DNS.
  • USB port for direct connection to ARM/x86 hosts or industrial PCs; UART port with hardware flow control for host boards such as Arduino/STM32.
  • Nano-SIM slot; supports 1.8 V / 3 V nano-SIM cards.
  • Three LED indicators for monitoring operating status.
  • Baud rates: support from 300 bps to 4 Mbps (default 115200 bps); auto-negotiation between 9600 and 115200 bps.
  • GNSS functionality requires separately purchasing a GPS antenna (for the G-H variant).
  • Firmware and model queries can be made via AT commands (e.g., AT+CGMM, AT+CGSN, AT+CSUB, AT+CGMR).
  • Network registration and signal quality can be checked with AT+COPS?, AT+CREG? and AT+CSQ.

Commands and examples – verify before use:  

AT
ATE1
ATE0
AT+CGMI
AT+CGMM
AT+CGSN
AT+CSUB
AT+CGMR
AT+IPREX
AT+CRESET
AT+CSQ
AT+CPIN?
AT+COPS?
AT+CREG?
AT+CPSI?
AT+CNMP=38
AT$QCRMCALL=1,1
at+Cusbpidswitch=9011,1,1
at+Cusbpidswitch=9001,1,1

Notes and version constraints

  • The source contains contradictory speed specifications (one section states 150 Mbps downlink and 50 Mbps uplink, another section swaps these values). Please confirm the correct specs with the manufacturer.
  • RNDIS modes (9011 vs 9001) are version-dependent; Win7 does not support RNDIS mode 9011 according to the source, so switch to NDIS.
  • To use GPS, the SIM7600G-H variant must be explicitly purchased; the CE-CNSE variant does not have GPS functionality.
  • Installing the wwan0 driver on Jetson/Raspberry Pi requires root privileges and may vary by system version.
  • NMEA output after enabling GPS: If no data appears, send the commands listed in the source and restart the module.
  • All AT commands should be verified in the target system before deployment, as exact syntax may vary by firmware version.

Source and revision record

Abgerufen von „https://wiki.jw-tech.eu/index.php?title=WSAL21445_–_SIM7600A-H_4G_DONGLE/en&oldid=1574“