Zum Inhalt springen

WSAL16316 – 13.3inch HDMI LCD (H) (with case) V2/en

Aus JW Tech Wiki
Version vom 6. September 2026, 00:29 Uhr von JWTechPublisher (Diskussion | Beiträge) (Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The Waveshare 13.3inch HDMI LCD (H) with case V2 is an IPS display with 1920×1080 resolution and a capacitive touch panel behind tempered glass (6H). It can be used both as a monitor for Windows PCs (Windows 7/8/8.1/10/11) and with Raspberry Pi (Raspberry Pi OS, Ubuntu, Kali, Retropie). The unit has a built-in speaker, 3.5 mm audio out, VGA input (cable sold separately), 100 × 100 mm mounting holes (M4) and a 60° tilt stand.

Related products at JW Tech

Technical overview

  • 13.3-inch IPS panel with 1920×1080 resolution
  • Capacitive touch panel behind 6H tempered glass
  • Works as a PC monitor under Windows 7/8/8.1/10/11 with 10-point touch
  • Supports Raspberry Pi OS, Ubuntu, Kali and Retropie on Raspberry Pi
  • Built-in high-quality speaker; 3.5 mm audio output via HDMI
  • VGA input available (Mini-HDMI-to-VGA cable must be purchased separately)
  • Mounting: 100 × 100 mm grid with M4 screw holes
  • Included stand provides a 60° tilt angle
  • Multi-language OSD menu for power management, brightness/contrast
  • Dual power: DC jack 12 V/1 A adapter (operating current ~12 V/0.6 A) plus USB touch connection (~5 V/80 mA)
  • Control keys: Power, Menu, Up/Left, Down/Right, Exit (V2)
  • Backlight adjustable via DDC/CI, e.g., Twinkle Tray (Windows) or ddcutil (Linux)
  • For multi-monitor setups, define this LCD as the primary display
  • Some PCs lack HDMI hot-plug support; reboot may resolve

Commands and examples – verify before use:  

hdmi_group=2
hdmi_mode=82
hdmi_cvt 1920 1080 60 6 0 0 0
sudo apt-get install ddcutil -y
sudo ddcutil detect
sudo ddcutil setvcp 10 <value>
disable_splash=1
wget https://files.waveshare.com/upload/1/18/Evdev-right-click-emulation.zip
unzip Evdev-right-click-emulation.zip
cd evdev-right-click-emulation
sudo apt install build-essential libevdev2 libevdev-dev -y
sudo cp 'out/evdev-rce' '/usr/local/bin/'
sudo chmod +x '/usr/local/bin/evdev-rce'
sudo evdev-rce
sudo usermod -G 'input' -a pi
echo 'uinput' | sudo tee -a /etc/modules
sudo nano /etc/udev/rules.d/99-uinput.rules
KERNEL=="uinput", MODE="0660", GROUP="input"
sudo udevadm control --reload-rules
sudo udevadm trigger

Notes and version constraints

  • The PWM backlight instructions explicitly refer to the 15.6inch HDMI LCD; whether they apply to this 13.3inch model needs technician confirmation.
  • The long-press/right-click tool supports only 32-bit Raspberry Pi systems per the source; 64-bit systems are not supported.
  • Using VGA requires a Mini-HDMI-to-VGA adapter cable that must be purchased separately.
  • Exact compatibility with specific mini-PCs or OS versions should be verified before purchase.
  • Product names shown as placeholders (e.g., {{{name3}}}, {{{userDefinedInfo}}) are template artifacts, not valid product names.
  • The specified power connector (12 V/1 A, outer Ø 3.5 mm, inner Ø 1.35 mm) must be matched exactly; alternative supplies must keep ripple within ±5 %.

Source and revision record

Abgerufen von „https://wiki.jw-tech.eu/index.php?title=WSAL16316_–_13.3inch_HDMI_LCD_(H)_(with_case)_V2/en&oldid=1444“