Zum Inhalt springen

WSAL20158 – SIM8200EA-M2 5G for Jetson Nano/en

Aus JW Tech Wiki
Version vom 6. September 2026, 00:28 Uhr von JWTechPublisher (Diskussion | Beiträge) (Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)

Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

Summary

The Waveshare SIM8200EA-M2 is a baseboard with an M.2 connector that hosts a SIMCom 5G module (e.g., SIM8202G-M2 on the Qualcomm Snapdragon X55 platform) and plugs directly into the Jetson Nano via a 40-pin GPIO header. It provides a USB3.1 port, audio jack, SIM card slot, and two status LEDs to enable 5G/4G/3G data communication, telephony, SMS, cloud connectivity, and GNSS positioning.

Related products at JW Tech

Technical overview

  • Hosts a SIMCom 5G module in an M.2 package; the SIM8200EA-M2 has 6 antenna connectors (IPEX-4), while the SIM8202G-M2 has 4.
  • Supports 5G Sub-6G SA/NSA, LTE-FDD/TDD, WCDMA, and multi-mode/multi-band; band n79 is only available on the SIM8202G-M2.
  • Peak data rates: up to 4 Gbps downlink / 500 Mbps uplink for 5G Sub-6G; 2 Gbps/200 Mbps for LTE; 42/5.76 Mbps for HSPA.
  • GNSS supports GPS, GLONASS, Beidou, Galileo, and QZSS (multi-constellation dual-band positioning).
  • Connects to the Jetson Nano via the 40-pin GPIO header; a recent Jetson Nano SD-card image with a kernel newer than 4.9.140-tegra is recommended.
  • For other Linux systems, download the driver from the SIM8200_OS_Driver/linux folder and port it according to the provided documentation.
  • Software installation on Jetson Nano uses a 7z archive (Sim8200_for_jetsonnano.7z) installed via install.sh; specific files must remain unmodified.
  • AT commands are tested via minicom on port /dev/ttyUSB2; 5G network connection is performed using the simcom-cm script in the Goonline directory.
  • GPS test: connect a passive GPS antenna to ANT5, send AT+CGPS=1, and receive NMEA data through the NMEA port.

Commands and examples – verify before use:  

sudo apt-get install p7zip-full
wget https://files.waveshare.com/upload/0/07/Sim8200_for_jetsonnano.7z
7z x Sim8200_for_jetsonnano.7z -r -o./Sim8200_for_jetsonnano
sudo chmod 777 -R Sim8200_for_jetsonnano
cd Sim8200_for_jetsonnano
sudo ./install.sh
ifconfig -a
sudo apt-get install minicom
sudo minicom -D /dev/ttyUSB2
cd Goonline && make && sudo ./simcom-cm
AT$QCRMCALL=1,1
AT+CGPS=1+
AT+CNBP?
AT+CNBP=0x100600000FC00000,0x00000000000000460000A7E2BB0F38DF,0x0000000000000000,0x00000000003FFE63000681E2090828D7. 0x00000000003FFE63000681E2090828D7
AT+CNMP=71
AT+SMSIMCFG=1,1
AT+CFUN=1
lsusb
ls /dev/ttyUSB*
sudo ./simcom-cm -i wwan0

Notes and version constraints

  • Actual speeds depend heavily on base-station distance, load, coverage, and carrier limits; lab peak values are not guaranteed in real-world use.
  • On other Linux systems, the driver must be manually ported; compatibility is not automatic.
  • Modifying or deleting the option, qmi_wwan_simcom, default.script, and install.sh files will prevent correct installation.
  • If installation fails, fall back to kernel version 4.9.140-tegra.
  • Compatible M.2 modules must have both an M.2 B-Key connector and USB functionality; PCIe-only modules are not supported.
  • When connecting multiple 5G modules to a Raspberry Pi, they appear as wwan0 and wwan1; selecting the correct interface requires manual verification.

Source and revision record

Abgerufen von „https://wiki.jw-tech.eu/index.php?title=WSAL20158_–_SIM8200EA-M2_5G_for_Jetson_Nano/en&oldid=1386“