WSAL18709 – PI-FAN-3007/en
Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.
Summary
The PI-FAN-3007 is a low-profile cooling fan with an aluminum alloy bracket designed to cool the processor of Raspberry Pi 4B, 3B+, and 3B boards.
Related products at JW Tech
- WSAL18709 – Low-Profile CPU Cooling Fan for Raspberry Pi 4B/3B+/3B, with Aluminum Alloy Bracket
- WSAL19254 – Low-Profile CPU Cooling Fan for Raspberry Pi 4B/3B+/3B, with Aluminum Alloy Bracket
Technical overview
- Compatibility: Designed for Raspberry Pi 4B, 3B+, and 3B; no information on other models in the source.
- Aluminum alloy bracket for mounting to the board.
- Top side: M1.5 threaded holes for top mounting.
- Bottom side: M2.5 threaded holes for securing the Raspberry Pi board.
- Support screws: M2*7 and M2*5.3 per the FAQ answer.
- Low profile reduces installation space compared to standard fans.
- No electrical values (voltage, current) are given in the source.
- No control commands or firmware interface are provided in the source.
Notes and version constraints
- The source provides no electrical specifications (operating voltage, current draw).
- No assembly steps or required tools are documented; only thread diameters are listed.
- No safety, certification, or warranty information is present.
- Compatibility is limited to the listed Pi models; other boards are unconfirmed.
- Thread sizes come from a single FAQ answer; verify with the manufacturer before assembly.
Source and revision record
- PI-FAN-3007 - Waveshare Wiki
- Source revision: 89612
- Captured: 2026-09-01T03:37:35+00:00
- SHA-256:
1c88212cf8cdfb0300c03a556b2e3b3438bf1d3ccd51dc7766c6e90f39214b1f