WSAL11325 – CP2102 USB UART Board (micro)/en
Documentation notice: This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.
Summary
Compact Waveshare module with a CP2102 chip and USB micro connector for converting USB to UART signals. It serves as a simple interface between a PC and serial devices.
Related products at JW Tech
Technical overview
- Base chip: CP2102 USB-to-UART bridge
- Connector: USB micro plug
- Purpose: Converts USB signals into the UART protocol to enable communication with serial peripherals
- Category: Modules / USB
- Manufacturer: Waveshare
- Related product variants: micro, mini, and type A versions
- Wiki resources: schematic, datasheets, software/drivers
- Official driver download for the CP2102 is available on the manufacturer's website (Silabs)
Notes and version constraints
- No specific commands or instructions were provided in the source.
- The exact driver version is not stated; verify the current driver version before installation.
- Additional technical specifications such as power supply, baud rate, or pinout are missing from the source and require separate confirmation.
Source and revision record
- CP2102 USB UART Board (micro) - Waveshare Wiki
- Source revision: 67704
- Captured: 2026-08-30T02:56:30+00:00
- SHA-256:
1efd36b8d1bcaece92909aec03a52b4bf009a92e56b6d4e0aff51625279e5470