Quelltext der Seite WSAL23253 – SIM8202G-M2 5G HAT (B)/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The SIM8202G-M2 5G HAT (B) is a Raspberry Pi add-on with an M.2 B-key connector for 5G/4G/3G communication, four antenna ports and a USB 3.1 port. It supports the SIM8202G-M2, SIM8262E-M2 and RM50XQ series modules.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL23253 WSAL23253 – SIM82XX-M2 5G HAT For Raspberry Pi, Quad Antennas 5G NSA, Multi-Band, 5G/4G/3G Compatible, With Case(Optional)]
* [https://shop.jw-tech.eu/p/WSAL23254 WSAL23254 – SIM82XX-M2 5G HAT For Raspberry Pi, Quad Antennas 5G NSA, Multi-Band, 5G/4G/3G Compatible, With Case(Optional)]

== Technical overview ==
* M.2 B-key connector compatible with 5G modules from the RM500U-CN, RM500Q-GL, RM500Q-AE and RM502Q-AE series.
* USB 3.1 port (backward compatible with USB 2.0) for connecting to a PC, Raspberry Pi or Jetson Nano host.
* Two SIM card slots: dual-card single standby; switchable via AT command where the module supports it.
* Four IPEX-4 antenna connectors for 3G/4G/5G/GNSS.
* Onboard voltage level translator for UART, PWR and RST control pins, enabled through a DIP switch.
* USB-C input for external power (5 V / 3 A); power switch selectable between USB and EXT PWR modes.
* Power on/off switch, reset button and LED indicator for monitoring operating status.
* Built-in cooling fan cools both the Raspberry Pi and the 5G module simultaneously.
* Supported operating systems: Windows, Linux, Android; protocols include TCP/IP, IPv4/IPv6, Multi-PDP, FTP/FTPS, HTTP/HTTPS, MQTTS, DNS, SSL3.0.
* Data rates: 5G Sub-6 GHz up to 2.4 Gbps downlink / 500 Mbps uplink; LTE up to 1 Gbps downlink / 200 Mbps uplink.

'''Commands and examples – verify before use:''' 
<syntaxhighlight lang="text">
lsusb
ls /dev/ttyUSB*
</syntaxhighlight>

== Notes and version constraints ==
* Exact band and regional support depends on the chosen 5G module; select modules according to local operator network coverage and supported frequency bands.
* Dual-SIM functionality requires module support; not all supported modules support two cards.
* Audio function is supported by the SIM82XX series but not by the RM50XX series.
* When handling IPEX antenna connectors: gently wiggle side-to-side and pull straight out without force; connectors are fragile.
* Fan noise may increase after prolonged use as bearing lubricant evaporates – this is normal, not a fault.
* Modules without USB function (PCIe only) are not supported; when using other modules, verify pin compatibility by actual testing.

== Source and revision record ==
* [https://www.waveshare.com/wiki/SIM8202G-M2_5G_HAT_(B) SIM8202G-M2 5G HAT (B) - Waveshare Wiki]
* Source revision: 99703
* Captured: 2026-09-04T02:48:38+00:00
* SHA-256: <code>0af07f306e12e85008a73dc3f4804fd854441c251236aef55c7e752bb0e51bdb</code>