Quelltext der Seite WSAL22384 – PT-AF-2GT-60T-19B-6-A/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The PT-AF-2GT-60T-19B-6-A is a ribbed aluminum timing pulley in the 2GT series with 60 teeth, a 19mm bore diameter, and four M3 mounting holes. It suits reduction-drive and automation applications.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL22384 WSAL22384 – 2GT 60 Teeth Aluminum Timing Pulley, 19mm Center Bore Diameter, with 4 Flat Holes]

== Technical overview ==
* Material: Aluminum alloy
* Tooth type: 2GT
* Number of teeth: 60
* Flange outer diameter: 40.12 mm
* Teeth outer diameter: 37.68 mm
* Pulley thickness: 10 mm
* Inner bore diameter: 19 mm
* Mounting: Four M3 flat holes on a 28 mm pitch circle

== Notes and version constraints ==
* Installing F6800ZZ flange bearings is recommended to distribute radial loads; exact installation must be verified on-site.
* Recommended belt length is 6mm; other lengths are not specified.
* Reduction group data (30T/20T/16T with 60T) refers to specific center distances; modifications require recalculation.
* No torque amplification factors or efficiency figures found.
* Version-specific procedural steps are missing; please consult manufacturer documentation.

== Source and revision record ==
* [https://www.waveshare.com/wiki/PT-AF-2GT-60T-19B-6-A PT-AF-2GT-60T-19B-6-A - Waveshare Wiki]
* Source revision: 67834
* Captured: 2026-09-03T03:58:15+00:00
* SHA-256: <code>7e22be39351c8a9155ecd7fc072a1682a4f533f0b0e744c8095649256c7050df</code>