Quelltext der Seite WSAL21445 – SIM7600A-H 4G DONGLE/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The SIM7600A-H is an industrial-grade 4G dongle with GNSS positioning for North America (AT&amp;T). It supports 2G/3G/4G, USB and UART connections, and TCP/UDP/HTTP(S)/MQTT via AT commands.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL21445 WSAL21445 – SIM7600A-H 4G DONGLE, GNSS Positioning, for North America (AT&amp;T)]

== Technical overview ==
* Supports 2G/3G/4G network connections and the protocols TCP/IP, IPv4/IPv6, Multi-PDP, FTP/FTPS, HTTP/HTTPS, DNS.
* USB port for direct connection to ARM/x86 hosts or industrial PCs; UART port with hardware flow control for host boards such as Arduino/STM32.
* Nano-SIM slot; supports 1.8 V / 3 V nano-SIM cards.
* Three LED indicators for monitoring operating status.
* Baud rates: support from 300 bps to 4 Mbps (default 115200 bps); auto-negotiation between 9600 and 115200 bps.
* GNSS functionality requires separately purchasing a GPS antenna (for the G-H variant).
* Firmware and model queries can be made via AT commands (e.g., AT+CGMM, AT+CGSN, AT+CSUB, AT+CGMR).
* Network registration and signal quality can be checked with AT+COPS?, AT+CREG? and AT+CSQ.

'''Commands and examples – verify before use:''' 
<syntaxhighlight lang="text">
AT
ATE1
ATE0
AT+CGMI
AT+CGMM
AT+CGSN
AT+CSUB
AT+CGMR
AT+IPREX
AT+CRESET
AT+CSQ
AT+CPIN?
AT+COPS?
AT+CREG?
AT+CPSI?
AT+CNMP=38
AT$QCRMCALL=1,1
at+Cusbpidswitch=9011,1,1
at+Cusbpidswitch=9001,1,1
</syntaxhighlight>

== Notes and version constraints ==
* The source contains contradictory speed specifications (one section states 150 Mbps downlink and 50 Mbps uplink, another section swaps these values). Please confirm the correct specs with the manufacturer.
* RNDIS modes (9011 vs 9001) are version-dependent; Win7 does not support RNDIS mode 9011 according to the source, so switch to NDIS.
* To use GPS, the SIM7600G-H variant must be explicitly purchased; the CE-CNSE variant does not have GPS functionality.
* Installing the wwan0 driver on Jetson/Raspberry Pi requires root privileges and may vary by system version.
* NMEA output after enabling GPS: If no data appears, send the commands listed in the source and restart the module.
* All AT commands should be verified in the target system before deployment, as exact syntax may vary by firmware version.

== Source and revision record ==
* [https://www.waveshare.com/wiki/SIM7600A-H_4G_DONGLE SIM7600X 4G DONGLE - Waveshare Wiki]
* Source revision: 98329
* Captured: 2026-09-03T02:53:47+00:00
* SHA-256: <code>536c1219f3d5b9a9a6b8b320e8693fc6e8b21e12cc8ab2f498a7f69bc22bfa5f</code>