Quelltext der Seite WSAL20162 – USB 3.2 Gen1 TO Gigabit ETH/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The Waveshare USB 3.2 Gen1 to Gigabit Ethernet Converter (SKU WSAL20162) provides an RJ45 gigabit port via a USB 3.2 Gen1 connection. It uses the Realtek RTL8153 chip, is driver-free, and supports Win7/8/8.1/10, Mac, Linux, and Android.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL20162 WSAL20162 – USB 3.2 Gen1 TO Gigabit Ethernet Converter, Driver-Free]

== Technical overview ==
* Main controller: Realtek RTL8153
* Network port: RJ45 Gigabit Ethernet
* USB interface: USB 3.2 Gen1; when connected to a USB 2.0 port, full gigabit speed cannot be reached
* Supported network standards: 10/100/1000 Mbps
* Operating systems: Windows 7/8/8.1/10, macOS, Linux, Android
* Cable/connector length: about 15 cm (manually measured by the manufacturer; minor deviations possible)
* Status indicator: green LED stays on, yellow LED blinks
* Product category: USB 3.0 / Gigabit ETH

== Notes and version constraints ==
* The source lists no specific commands or configuration steps; therefore the commands field is left empty.
* The stated cable length is a manual measurement by the manufacturer and may vary slightly.
* When using a USB 2.0 port, achievable speed drops below gigabit — verify that a USB 3.x port is available before purchase.
* The source does not include warranty, certifications, pricing, or stock information; such values must not be added here.

== Source and revision record ==
* [https://www.waveshare.com/wiki/USB_3.2_Gen1_TO_Gigabit_ETH USB 3.2 Gen1 TO Gigabit ETH - Waveshare Wiki]
* Source revision: 100793
* Captured: 2026-09-02T03:25:49+00:00
* SHA-256: <code>bbf6955464556ec09bc340e51f8acaa45f38aa3f4f4828079a2ff94992ddeff5</code>