Quelltext der Seite WSAL18709 – PI-FAN-3007/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The PI-FAN-3007 is a low-profile cooling fan with an aluminum alloy bracket designed to cool the processor of Raspberry Pi 4B, 3B+, and 3B boards.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL18709 WSAL18709 – Low-Profile CPU Cooling Fan for Raspberry Pi 4B/3B+/3B, with Aluminum Alloy Bracket]
* [https://shop.jw-tech.eu/p/WSAL19254 WSAL19254 – Low-Profile CPU Cooling Fan for Raspberry Pi 4B/3B+/3B, with Aluminum Alloy Bracket]

== Technical overview ==
* Compatibility: Designed for Raspberry Pi 4B, 3B+, and 3B; no information on other models in the source.
* Aluminum alloy bracket for mounting to the board.
* Top side: M1.5 threaded holes for top mounting.
* Bottom side: M2.5 threaded holes for securing the Raspberry Pi board.
* Support screws: M2*7 and M2*5.3 per the FAQ answer.
* Low profile reduces installation space compared to standard fans.
* No electrical values (voltage, current) are given in the source.
* No control commands or firmware interface are provided in the source.

== Notes and version constraints ==
* The source provides no electrical specifications (operating voltage, current draw).
* No assembly steps or required tools are documented; only thread diameters are listed.
* No safety, certification, or warranty information is present.
* Compatibility is limited to the listed Pi models; other boards are unconfirmed.
* Thread sizes come from a single FAQ answer; verify with the manufacturer before assembly.

== Source and revision record ==
* [https://www.waveshare.com/wiki/PI-FAN-3007 PI-FAN-3007 - Waveshare Wiki]
* Source revision: 89612
* Captured: 2026-09-01T03:37:35+00:00
* SHA-256: <code>1c88212cf8cdfb0300c03a556b2e3b3438bf1d3ccd51dc7766c6e90f39214b1f</code>