Quelltext der Seite WSAL11325 – CP2102 USB UART Board (micro)/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
Compact Waveshare module with a CP2102 chip and USB micro connector for converting USB to UART signals. It serves as a simple interface between a PC and serial devices.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL11325 WSAL11325 – CP2102 USB UART Board (micro)]

== Technical overview ==
* Base chip: CP2102 USB-to-UART bridge
* Connector: USB micro plug
* Purpose: Converts USB signals into the UART protocol to enable communication with serial peripherals
* Category: Modules / USB
* Manufacturer: Waveshare
* Related product variants: micro, mini, and type A versions
* Wiki resources: schematic, datasheets, software/drivers
* Official driver download for the CP2102 is available on the manufacturer's website (Silabs)

== Notes and version constraints ==
* No specific commands or instructions were provided in the source.
* The exact driver version is not stated; verify the current driver version before installation.
* Additional technical specifications such as power supply, baud rate, or pinout are missing from the source and require separate confirmation.

== Source and revision record ==
* [https://www.waveshare.com/wiki/CP2102_USB_UART_Board_(micro) CP2102 USB UART Board (micro) - Waveshare Wiki]
* Source revision: 67704
* Captured: 2026-08-30T02:56:30+00:00
* SHA-256: <code>1efd36b8d1bcaece92909aec03a52b4bf009a92e56b6d4e0aff51625279e5470</code>