Quelltext der Seite WSAL11297 – RPi Camera (D)/en

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
Concise technical overview for using the RPi Camera (D) with Raspberry Pi boards, including connection, software configuration and capture commands.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL11297 WSAL11297 – RPi Camera (D)]

== Technical overview ==
* The camera connects via the CSI port; on Pi 5 a second CSI port is available.
* For non-official cameras, set camera_auto_detect=0 in /boot/config.txt (or /boot/firmware/config.txt on Bookworm).
* Specific sensors require a dtoverlay entry, e.g. dtoverlay=imx219 or dtoverlay=ov5647.
* Two cameras can be connected simultaneously by appending cam0 and cam1 to their respective entries.
* rpicam-hello starts a preview for about five seconds and can be closed with Alt+F4 or Ctrl+C.
* rpicam-jpeg captures a JPEG image; options like -t, --width and --height control duration and resolution.
* Tuning files adjust image quality per sensor variant, e.g. imx219_noir.json.
* Picamera2 also supports USB cameras via MJPEG/YUYV but requires the Qt preview and OpenCV for YUYV conversion.

'''Commands and examples – verify before use:''' 
<syntaxhighlight lang="text">
sudo apt-get update -y
sudo apt-get upgrade -y
sudo nano /boot/config.txt
sudo nano /boot/firmware/config.txt
dtoverlay=imx219
dtoverlay=ov5647,cam1
sudo libcamera-hello -t 0
sudo libcamera-hello -t 0 --camera 1
rpicam-hello
rpicam-jpeg -o test.jpg -t 2000 --width 640 --height 480
</syntaxhighlight>

== Notes and version constraints ==
* Some steps depend on the exact system version (Bookworm vs. Bullseye); verify the OS version before running commands.
* Connecting IMX290 to Pi 5 requires an additional JSON file from an external source; this needs network access and manual confirmation.
* Not all features (e.g. video recording with USB cameras) are available; hot-plugging is not supported.
* Please verify board/sensor compatibility before deployment; the source does not list every supported combination.

== Source and revision record ==
* [https://www.waveshare.com/wiki/RPi_Camera_(D) RPi Camera (D) - Waveshare Wiki]
* Source revision: 89226
* Captured: 2026-08-30T02:53:00+00:00
* SHA-256: <code>cab49af67e7d5ff5a07c433d38af9315c3da7f6f3f23acfffe0ce6c325e06d93</code>