JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

2026-09-06T07:59:18Z

Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

Neue Seite

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The Raspberry Pi Global Shutter Camera module uses the IMX296LQR-C sensor with 1.6 MP (1456×1088) and supports C/CS-mount lenses. It connects via the CSI port on Raspberry Pi boards and is primarily controlled through the libcamera-based rpicam commands.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL24385 WSAL24385 – Raspberry Pi Original Global Shutter Camera Module, Supports C/CS mount lenses, 1.6MP, High-speed Motion photography]

== Technical overview ==
* Sensor: Sony IMX296LQR-C, global shutter, 1456×1088 pixels, 6.3 mm CMOS diagonal, 3.45 µm pixel pitch, RAW10 output.
* Mount: Supports C-mount and CS-mount; adapter included; aperture manually adjustable.
* Connection: CSI connector located between audio jack and HDMI port; on Pi Zero beside the power connector; orient the FPC cable's metal side toward the specified port.
* Supported boards: All Raspberry Pi models; driver type: libcamera.
* Related lenses: 16 mm wide-angle, 25 mm telephoto, 35 mm telephoto, 8–50 mm zoom; various image formats (1/2", 1", 2/3").
* System update before use: sudo apt-get update -y && sudo apt-get upgrade -y.
* Configuration: For non-official cameras set camera_auto_detect=0 in /boot/firmware/config.txt; add dtoverlay lines per sensor model.
* rpicam-hello starts a preview for about 5 seconds; close via Alt+F4 or Ctrl+C in the terminal.
* rpicam-jpeg captures a full-resolution JPEG; -t, --width, --height control duration and resolution.
* Exposure control: Fixed shutter speed and gain per app; tuning files under /usr/share/libcamera/ipa/rpi/pisp/ for Pi 5.
* Two cameras simultaneously: assign cam0/cam1 via dtoverlay=…,cam0 and dtoverlay=…,cam1.

'''Commands and examples – verify before use:'''
<syntaxhighlight lang="text">
sudo apt-get update -y
sudo apt-get upgrade -y
sudo nano /boot/firmware/config.txt
camera_auto_detect=0
dtoverlay=imx296,cam0
rpicam-hello
rpicam-hello -t 0
rpicam-hello --tuning-file /usr/share/libcamera/ipa/rpi/pisp/imx219_noir.json
rpicam-jpeg -o test.jpg
rpicam-jpeg -o test.jpg -t 2000 --width 640 --height 480
sudo libcamera-hello -t 0
sudo libcamera-hello -t 0 --camera 0
sudo libcamera-hello -t 0 --camera 1
</syntaxhighlight>

== Notes and version constraints ==
* The source contains placeholders such as {{{name2}}} through {{{name6}}} and {{{userDefinedInfo}}} that are unresolved in this revision – associated values must be filled in manually.
* Command version sensitivity is high: rpicam-* replaces libcamera-* from Bookworm onward; older Bullseye systems still require libcamera commands.
* Downloading Imx290.zip from an external link is version-specific and requires network connectivity; the path may change.
* The OpenCV tuning code snippets are for reference only; exact AWB values depend heavily on environment and require individual adjustment.
* Not all listed lenses are compatible with every sensor format; the compatibility matrix must be verified per project.
* The statement 'All Raspberry Pi boards' refers to supported board families, not every model without restriction – carrier-board layouts can vary.

== Source and revision record ==
* [https://www.waveshare.com/wiki/Raspberry_Pi_Global_Shutter_Camera Raspberry Pi Global Shutter Camera - Waveshare Wiki]
* Source revision: 89230
* Captured: 2026-09-04T04:12:24+00:00
* SHA-256: <code>0db0fd9d9cc79bfa2312ae3d0d73bfd985a3f6a9723ed1a058363fe300a9686d</code>

WSAL24385 – Raspberry Pi Global Shutter Camera/en - Versionsgeschichte

JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex