https://wiki.jw-tech.eu/index.php?action=history&feed=atom&title=WSAL23739_%E2%80%93_10.1DP-CAPLCD%2FenWSAL23739 – 10.1DP-CAPLCD/en - Versionsgeschichte2026-10-23T21:06:37ZVersionsgeschichte dieser Seite in JW Tech WikiMediaWiki 1.43.9https://wiki.jw-tech.eu/index.php?title=WSAL23739_%E2%80%93_10.1DP-CAPLCD/en&diff=2939&oldid=prevJWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex2026-09-06T07:59:28Z<p>Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex</p>
<p><b>Neue Seite</b></p><div>__NOINDEX__<br />
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.<br />
<br />
== Summary ==<br />
The 10.1DP-CAPLCD is a 10.1-inch IPS display with 1280×800 resolution, 10-point capacitive touch, and an optically bonded tempered glass panel. It connects via HDMI for video and USB for the touch input; power is supplied through a 5V Type-C port.<br />
<br />
== Related products at JW Tech ==<br />
* [https://shop.jw-tech.eu/p/WSAL23739 WSAL23739 – 10.1inch Capacitive Touch Display, Optical Bonding Toughened Glass Panel, 1280×800, IPS, HDMI Interface]<br />
<br />
== Technical overview ==<br />
* Screen type: 10.1-inch IPS, resolution 1280 × 800 pixels<br />
* Touch: 10-point capacitive, tempered glass (hardness up to 6H), optical bonding technology<br />
* Connectors: HDMI for video, USB for touch, 5V Type-C for power, 3.5 mm headphone jack and 4PIN speaker jack<br />
* Operating voltage: nominal 5.00 V (range 4.75–5.25 V); input current at least 750 mA<br />
* Maximum brightness 350 cd/m², contrast ratio 800:1, refresh rate 60 Hz<br />
* Color gamut coverage 58% NTSC<br />
* Dimensions: touch panel 239.00 (W) × 147.00 (H) × 2 mm; display panel 228.6 (W) × 143.0 (H) × 2.60 mm; display area 135.36 (W) × 216.58 (H) mm<br />
* Weight: 538 g; power consumption approx. 4 W<br />
* Compatibility: Raspberry Pi OS, Ubuntu, Kali, Retropie; as a monitor under Windows 11/10/8.1/8/7<br />
* EDID sequence parameters: pixel clock 77.00 MHz, H addressable 1280, H blanking 232, V addressable 800, V blanking 56<br />
<br />
'''Commands and examples – verify before use:''' <br />
<syntaxhighlight lang="text"><br />
hdmi_group=2<br />
hdmi_mode=87<br />
hdmi_cvt 1280 800 60 6 0 0 0<br />
hdmi_drive=1<br />
sudo apt-get install ddcutil -y<br />
sudo ddcutil detect<br />
sudo ddcutil setvcp 10 <value><br />
</syntaxhighlight><br />
<br />
== Notes and version constraints ==<br />
* The maximum input current value in the datasheet is listed as 'TBD' – please confirm with Waveshare before purchase.<br />
* When used with Raspberry Pi, the resolution must be set manually in config.txt, otherwise the display may be incorrect.<br />
* If USB power is insufficient, the display will flicker; connect an external 5V/1A adapter to the power port.<br />
* EDID sequence parameters are only needed if the system cannot auto-detect the EDID.<br />
* Fully turning off the backlight or enabling PWM control requires soldering on the board – V1 and V2 versions differ in pad locations.<br />
* Avoid long-term storage in high-temperature, high-humidity environments.<br />
* The 4PIN speaker header requires a PH1.25 connector with wiring order + − − + and supports up to 2 × 2.3 W.<br />
<br />
== Source and revision record ==<br />
* [https://www.waveshare.com/wiki/10.1DP-CAPLCD 10.1DP-CAPLCD - Waveshare Wiki]<br />
* Source revision: 105306<br />
* Captured: 2026-09-04T03:23:32+00:00<br />
* SHA-256: <code>ebb85c9c235c5e62029fcc9d8bc138b328d27761c1ec3ebd0774e2ae404fde53</code></div>JWTechPublisher