JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

2026-09-05T22:34:50Z

Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

Neue Seite

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The 10.5-inch capacitive touch AMOLED display with HDMI interface provides a 2560×1600 2K resolution, optical bonding, and a CNC-machined alloy enclosure.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL21322 WSAL21322 – 10.5inch Capacitive Touch AMOLED, HDMI, 2560×1600 2K Resolution, Optical Bonding]
* [https://shop.jw-tech.eu/p/WSAL21702 WSAL21702 – 10.5inch Capacitive Touch AMOLED, HDMI, 2560×1600 2K Resolution, Optical Bonding]
* [https://shop.jw-tech.eu/p/WSAL22356 WSAL22356 – 10.5inch Capacitive Touch AMOLED, HDMI, 2560×1600 2K Resolution, Optical Bonding]

== Technical overview ==
* Resolution: 2560 × 1600 (2K); panel type: AMOLED; capacitive touch up to 10 points (OS-dependent).
* Optically bonded display with toughened glass (up to 6H hardness); dust-proof.
* Interfaces: HDMI for video/audio, USB for touch input, 3.5 mm headphone/audio jack, built-in speaker.
* Enclosure: CNC-machined alloy housing.
* EDID timing parameters (if the system does not auto-detect EDID): pixel clock 297 MHz, H/V addressable 2560/1600, H blanking 420, V blanking 52, H front porch 120, H sync width 32, V front porch 32, V sync width 32, H image size 256, V image size 160, borders 0.
* Raspberry Pi 4B: Supports Raspberry Pi OS / Ubuntu / Kali driver-free; manual resolution configuration via config.txt is required.
* PC use: Supports Windows 11/10/8.1/8/7; touch is auto-detected; audio via built-in speaker or 3.5 mm jack.
* Jetson Nano: Connect the touch port to a USB port and the HDMI port to the Jetson board's HDMI port.
* Power draw at 5 V supply: about 850 mA at default brightness, about 1.3 A at maximum brightness.
* Brightness levels: Level 1 ≈ 30 cd/m², Level 2 ≈ 90 cd/m², Level 3 ≈ 150 cd/m² (default), Level 4 ≈ 220 cd/m², Level 5 ≈ 300 cd/m².

'''Commands and examples – verify before use:'''
<syntaxhighlight lang="text">
hdmi_force_hotplug=1
hdmi_timings=2560 0 300 32 102 1600 0 10 10 10 0 0 0 60 0 297000000 3
framebuffer_width=2560
framebuffer_height=1600
config_hdmi_boost=4
hdmi_group=2
hdmi_mode=87
dtoverlay=vc4-fkms-V3D
sudo apt-get install xscreensaver
</syntaxhighlight>

== Notes and version constraints ==
* AMOLED displays are prone to burn-in when static content is shown for extended periods; set a screensaver and avoid displaying the same static image for more than 1 hour.
* Aging USB ports may provide insufficient power; use the included 5 V/3 A Type-C adapter on the display’s power port if needed.
* The exact config.txt settings are version-sensitive for Raspberry Pi OS; additional line dtoverlay=vc4-fkms-V3D is required for Kali — please verify before submitting.
* The “up to 10-point touch” claim depends on the operating system; the actual number of supported touch points must be verified per system.
* All electrical values (current draw, brightness) come from supplier material and should be independently confirmed for critical applications.

== Source and revision record ==
* [https://www.waveshare.com/wiki/10.5inch_HDMI_AMOLED 10.5inch HDMI AMOLED - Waveshare Wiki]
* Source revision: 110822
* Captured: 2026-09-03T02:41:51+00:00
* SHA-256: <code>3dbaf28939f2acfd6beaec78382dd72b0b5cc1edf4fe485eb6f8f87243a22387</code>

WSAL21322 – 10.5inch HDMI AMOLED/en - Versionsgeschichte

JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex