JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

2026-09-05T22:29:22Z

Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

Neue Seite

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
PWM-controlled fan HAT with PCA9685 driver, I2C interface and integrated temperature monitoring. Includes a 0.91" OLED display (128×32), a 3007 fan (up to 8000 RPM), and 16 PWM outputs.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL17951 WSAL17951 – PWM Controlled Fan HAT for Raspberry Pi, I2C, Temperature Monitor]

== Technical overview ==
* Core: PCA9685 PWM driver as the fan controller with automatic PWM adjustment
* 0.91" OLED display (SSD1306 driver, 128×32 pixels, white, FOV > 160°)
* 3007 fan with up to 8000 RPM
* I2C bus for connecting other host control boards
* 16 PWM outputs for external devices
* Operating voltage 5 V, logic level 3.3 V
* Mounting holes 3.0 mm
* Comes with heat sinks
* Connects via the 40-pin GPIO header of the Raspberry Pi
* Temperature data is read in real time; fan speed adjusts automatically

'''Commands and examples – verify before use:'''
<syntaxhighlight lang="text">
sudo wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.71.tar.gz
sudo tar zxvf bcm2835-1.71.tar.gz
cd bcm2835-1.71/ && sudo ./configure && sudo make && sudo make check && sudo make install
sudo apt-get install wiringpi
wget https://files.waveshare.com/wiki/common/wiringpi-latest.deb && sudo dpkg -i wiringpi-latest.deb
sudo git clone https://github.com/WiringPi/WiringPi && cd WiringPi && sudo ./build
sudo su && wget https://github.com/joan2937/lg/archive/master.zip && unzip master.zip && cd lg-master && sudo make install
sudo apt-get update && sudo apt-get install python-pip && sudo pip install RPi.GPIO && sudo apt-get install python-smbus
sudo apt-get update && sudo apt-get install python3-pip && sudo pip install RPi.GPIO && sudo apt-get install python3-smbus
cd && sudo apt-get install p7zip-full && wget https://files.waveshare.com/upload/0/06/Fan_HAT.7z && 7z x Fan_HAT.7z -r -o./Fan_HAT
cd Fan_HAT/c/ && make clean && make && sudo ./main
cd Fan_HAT/python/ && sudo python main.py
sudo nano /etc/rc.local
</syntaxhighlight>

== Notes and version constraints ==
* On Bookworm systems only the lgpio library is available; bcm2835 and wiringPi cannot be installed or used
* The Python library does not need separate installation – the demo can be run directly
* I2C must be enabled on the Raspberry Pi, otherwise error prompts appear
* At low CPU load (~40 °C) the fan barely spins; it speeds up only when the CPU is under heavy computation
* Higher fan speed produces more noise; this is physically expected
* Version-sensitive steps: installation commands differ by OS branch (Bullseye/Bookworm)
* When adding the autostart entry in rc.local, the lines must be inserted before 'exit 0','All listed commands are taken from the source document; verify compatibility with your current system version before running them

== Source and revision record ==
* [https://www.waveshare.com/wiki/Fan_HAT Fan HAT - Waveshare Wiki]
* Source revision: 80830
* Captured: 2026-09-01T02:49:23+00:00
* SHA-256: <code>7fdbbae38eb46b72f38658ac1a5353378d8b3e1e4f624ce8574858f2e95e0541</code>

WSAL17951 – Fan HAT/en - Versionsgeschichte

JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex