JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

2026-09-05T22:34:18Z

Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

Neue Seite

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
Concise technical guide to the Waveshare 5-inch IPS display (800×480) with DPI interface, no touch.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL16381 WSAL16381 – 5inch Display for Raspberry Pi, 800×480, DPI Interface, IPS, No Touch]

== Technical overview ==
* 5-inch IPS panel with native resolution 800 × 480.
* Connects via the Raspberry Pi 40-pin GPIO header; driven through the DPI interface.
* Supports Raspberry Pi OS and Ubuntu as operating systems.
* Backlight can be switched off to reduce power consumption.
* The display is intended for output only; touch operation requires a different Waveshare model.
* Connection: attach the RGB LCD HAT to JP1 on the adapter using the white FFC cable; connect the golden FPC cable from the LCD to JP3 on the adapter.
* For Bookworm/Bullseye: add the listed dtoverlay lines to config.txt and copy two dtbo files into /boot/overlays.
* For Buster/Ubuntu: set dpi_timings, hdmi_timings and related parameters in config.txt.
* When inserting cables, open the black connector first and gently insert the cable.
* After powering on, wait about 10 seconds for the display to initialize.

'''Commands and examples – verify before use:'''
<syntaxhighlight lang="text">
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-DPI-5inch
dtoverlay=waveshare-5dpi
[pi4]
dpi_timings=800 0 40 48 88 480 0 13 3 32 0 0 0 60 0 26000000 6
[all]
dtoverlay=dpi24
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
dpi_output_format=0x6f005
hdmi_timings=800 0 40 48 88 480 0 13 3 32 0 0 0 60 0 32000000 6
disable_overscan=1
disable_splash=1
</syntaxhighlight>

== Notes and version constraints ==
* Exact timing parameter values may vary by Raspberry Pi revision; verify before deployment.
* This model has no touch input mechanism; choose a different Waveshare product if touch is required.
* Always safely eject and reboot after modifying config.txt so changes take effect.
* Compatibility with specific Raspberry Pi revisions is not explicitly confirmed in the source; verify before purchase.

== Source and revision record ==
* [https://www.waveshare.com/wiki/5inch_DPI_LCD 5inch DPI LCD - Waveshare Wiki]
* Source revision: 104426
* Captured: 2026-08-31T03:28:03+00:00
* SHA-256: <code>82f9d678efb28e26545dd6fc0c4f315857aac8a28d55d7c0b4796a0fcf88820a</code>

WSAL16381 – 5inch DPI LCD/en - Versionsgeschichte

JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex