JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

2026-09-05T22:38:55Z

Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

Neue Seite

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
Capacitive IPS display with 1920×1080 resolution, case kit and 60° tilt stand; supports Raspberry Pi operation and PC monitor use via HDMI or VGA.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL13859 WSAL13859 – 13.3inch Capacitive Touch Screen LCD with Case, 1920×1080, HDMI, IPS, Various Systems Support]

== Technical overview ==
* IPS panel with 1920×1080 resolution on a 13.3-inch display.
* Toughened glass cover over the capacitive touch unit, rated at 6H hardness.
* The case version includes a stand with an adjustable 60° tilt angle.
* Connections: HDMI for video/audio, USB for touch recognition, VGA via a separate mini-HDMI-to-VGA cable, 3.5mm jack for audio output over HDMI.
* Multi-language OSD menu for power management, brightness, and contrast.
* Mounting holes on a 100×100 mm grid with M4 screws for wall mounting.
* Built-in high-quality speaker removes the need for external speakers.
* Supported operating systems: Raspberry Pi OS, Ubuntu, Kali, and RetroPie on the Pi; Windows 7/8/8.1/10/11 on a PC.
* The no-case version lacks both VGA input and the stand function.
* Two power connections: DC port at 12 V / ~0.6 A and USB touch port at 5 V / ~80 mA.

'''Commands and examples – verify before use:'''
<syntaxhighlight lang="text">
hdmi_group=2
hdmi_mode=82
hdmi_cvt 1920 1080 60 6 0 0 0
disable_splash=1
sudo apt-get install ddcutil -y
sudo ddcutil detect
sudo ddcutil setvcp 10 <value>
wget https://files.waveshare.com/upload/1/18/Evdev-right-click-emulation.zip
unzip Evdev-right-click-emulation.zip
cd evdev-right-click-emulation
sudo apt install build-essential libevdev2 libevdev-dev -y
sudo cp 'out/evdev-rce' '/usr/local/bin/'
sudo chmod +x '/usr/local/bin/evdev-rce'
sudo evdev-rce
sudo usermod -G 'input' -a pi
echo 'uinput' | sudo tee -a /etc/modules
KERNEL=="uinput", MODE="0660", GROUP="input"
sudo udevadm control --reload-rules
sudo udevadm trigger
sudo reboot
evdev-rce
sudo mkdir ~/.config/autostart
</syntaxhighlight>

== Notes and version constraints ==
* Editing the hdmi_ parameters in config.txt is version-dependent; newer Raspberry Pi OS releases may use a different file layout – verify against current documentation before saving.
* Long-press right-click emulation requires a 32-bit environment; 64-bit systems are not supported by default.
* The PWM backlight experiment requires removing a transistor and soldering a PWM trace – intended for advanced users only.
* VGA operation requires a separately purchased mini-HDMI-to-VGA cable; it is not included in the box.
* The power supply specification (12 V/1 A, outer Ø 3.5 mm, inner Ø 1.35 mm) refers to the included adapter; any substitute must keep ripple within ±5 %.
* In multi-monitor setups, setting this display as the primary screen is recommended; some PCs lack HDMI hot-plug support and may need a PC restart.
* Automatic screen-off behavior depends on the OS; the official Raspberry Pi image blanks after roughly ten minutes of inactivity.

== Source and revision record ==
* [https://www.waveshare.com/wiki/13.3inch_HDMI_LCD_(H)_(with_case) 13.3inch HDMI LCD (H) (with case) - Waveshare Wiki]
* Source revision: 110868
* Captured: 2026-08-30T03:58:55+00:00
* SHA-256: <code>a37324c202ac3b652ec742bc63e3a7fbe68989ca85a97f0354b6bf05345484ee</code>

WSAL13859 – 13.3inch HDMI LCD (H) (with case)/en - Versionsgeschichte

JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex