JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

2026-09-05T22:27:28Z

Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

Neue Seite

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
Concise technical overview of wiring, driver configuration, and test commands for the Waveshare RPi Zero V1.3 fisheye camera module.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL12039 WSAL12039 – Raspberry Zero V1.3 mini Camera]

== Technical overview ==
* Connect via the CSI port; on Zero-series boards the connector is next to the power input.
* Supported sensors include OV5647, OV9281, IMX219, IMX290/IMX327, IMX378, IMX477, IMX519, IMX708, IMX296.
* Driver support: libcamera or Raspicam depending on sensor; some sensors need a separate driver.
* For non-official cameras set 'camera_auto_detect=0' in config.txt and add the matching dtoverlay line.
* Start preview with 'sudo libcamera-hello -t 0'; close with Alt+F4 or Ctrl+C in the terminal.
* Two cameras at once: append 'cam0' and 'cam1' to the respective dtoverlay commands.
* On Bookworm, prefer rpicam-* commands; libcamera is planned to be deprecated.
* On Bullseye with older Pis: enable Glamor and check that vc4-fkms-v3d or vc4-kms-v3d is active.

'''Commands and examples – verify before use:'''
<syntaxhighlight lang="text">
sudo apt-get update -y
sudo apt-get upgrade -y
sudo nano /boot/config.txt
sudo nano /boot/firmware/config.txt
dtoverlay=ov9281
dtoverlay=imx290, clock-frequency=37125000
dtoverlay=imx378
dtoverlay=imx219
dtoverlay=imx477
dtoverlay=imx708
sudo wget https://www.waveshare.net/w/upload/7/7a/Imx290.zip
sudo unzip Imx290.zip
sudo cp imx290.json /usr/share/libcamera/ipa/rpi/pisp
dtoverlay=imx219,cam0
dtoverlay=ov5647,cam1
sudo libcamera-hello -t 0
sudo libcamera-hello -t 0 --camera 0
sudo libcamera-hello -t 0 --camera 1
rpicam-hello
rpicam-hello -t 0
</syntaxhighlight>

== Notes and version constraints ==
* The source contains placeholders ({{{...}}) and truncated sections; some details are missing or unclear.
* Version-sensitive steps: the config.txt path differs between older systems and Bookworm (/boot/config.txt vs. /boot/firmware/config.txt).
* Some sensor/driver combinations require extra files or drivers; confirm before use.
* Not every listed sensor is necessarily relevant to this module; compatibility must be verified per board model.
* Marketing and navigation content removed; no price, stock, certification, or warranty claims included.

== Source and revision record ==
* [https://www.waveshare.com/wiki/RPi_Zero_V1.3_Camera RPi Zero V1.3 Camera - Waveshare Wiki]
* Source revision: 89258
* Captured: 2026-08-30T03:13:09+00:00
* SHA-256: <code>dce416de284c142ac204784f3c171c94a7c9fe704543bd94d539682382a6fbf9</code>

WSAL12039 – RPi Zero V1.3 Camera/en - Versionsgeschichte

JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex