JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

2026-09-05T22:31:59Z

Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

Neue Seite

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
Concise technical wiki for the Waveshare 10.1-inch capacitive touch LCD (H), resolution 1024×600. Covers interfaces, Raspberry Pi setup, PC usage, control keys and known limitations.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL11502 WSAL11502 – 10.1inch Capacitive Touch Screen LCD (H) with Case, 1024×600, HDMI, Various Systems Support]
* [https://shop.jw-tech.eu/p/WSAL11557 WSAL11557 – 10.1inch Capacitive Touch Screen LCD (H) with Case, 1024×600, HDMI, Various Systems Support]

== Technical overview ==
* The display has a native resolution of 1024 × 600 pixels and features a capacitive touch panel.
* Main control board interfaces: HDMI, VGA, and AV (CVBS) video inputs; a Micro USB port is used for communication/control.
* When using a Raspberry Pi, write the official OS image to a TF card and append hdmi_group=2, hdmi_mode=87, and hdmi_cvt 1024 600 60 6 0 0 0 to config.txt.
* The main control board connects to the display via a 40-pin FFC cable; contacts face down at the RGB connector. The hardware supports LVDS but no LVDS firmware is provided.
* Power requirements: 12 V / 1 A adapter for the main control board; the Raspberry Pi needs 5 V / 2.5 A (5 V / 3 A recommended if high-load devices such as a camera are attached).
* After powering on, the upper-left corner shows the active signal source; use the Source key to switch between HDMI, VGA, or AV as needed.
* If touch behaves abnormally under Linux, run the commands listed in the source to restore normal input behavior.
* Under Windows, touch works through mouse emulation, so touch coordinates do not adjust when the screen is rotated.

'''Commands and examples – verify before use:'''
<syntaxhighlight lang="text">
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
sudo apt-get install xserver-xorg-input-evdev
sudo mv /usr/share/X11/xorg.conf.d/40-libinput.conf /usr/share/X11/xorg.conf.d/40-libinput.conf_bak
reboot
</syntaxhighlight>

== Notes and version constraints ==
* The exact size of the main control board is not stated in the source; confirm with the manufacturer.
* LVDS toolchain: Hardware supports LVDS, but no firmware is available – operate via RGB/FFC only.
* Windows touch rotation issue: This model uses mouse-emulation; for correct coordinates after rotation, the (F) model is recommended instead.
* Power supply specification: Use only the voltage/current values given in the source; do not assume other adapters are compatible.
* Commands are version-sensitive: The Linux commands assume specific package versions; verify the environment before running them.

== Source and revision record ==
* [https://www.waveshare.com/wiki/10.1inch_HDMI_LCD_(H)_(with_case) 10.1inch HDMI LCD (H) (with case) - Waveshare Wiki]
* Source revision: 106602
* Captured: 2026-08-30T03:04:57+00:00
* SHA-256: <code>1d4a3870948de0dde61cce6aff404dad6ffe9718b26c046679c746059e32ace1</code>

WSAL11502 – 10.1inch HDMI LCD (H) (with case)/en - Versionsgeschichte

JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex