JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

2026-09-05T22:37:39Z

Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

Neue Seite

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The Waveshare XBee USB Adapter is a UART communication board featuring an XBee interface and a USB port. It primarily serves as a baseboard for the Core2530 (B) module, enabling serial firmware updates via the bootloader and supporting AT commands for configuring Zigbee settings.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL11293 WSAL11293 – XBee USB Adapter]

== Technical overview ==
* The board provides a USB-to-UART bridge and offers an XBee socket for modules such as the Core2530 (B).
* A Zigbee network requires at least one coordinator and one router; both must remain powered on and must not enter SLEEP mode.
* End devices in the network can be battery-powered and support SLEEP mode, but they transmit data only through a parent node.
* The built-in bootloader of the Core2530 (B) allows loading new firmware over the serial port without an additional CC debugger, provided the bootloader has already been flashed.
* Programming the bootloader itself requires a CC debugger; pressing the RESET button on the debugger initiates the download process via SmartRF Studio.
* After restart, a blinking LED1 indicates that no valid program exists in flash memory and new firmware can be loaded.
* PC communication is handled via the ZBSCOMM software or directly with AT commands over the serial port at 38400 baud, 8 data bits, and 1 stop bit.
* Broadcast messages reach all nodes in the network; P2P messages are sent to a single target address, while O2M targets multiple destinations.
* AT+GETADDR is used to query each module's short address before setting up targeted communication.

'''Commands and examples – verify before use:'''
<syntaxhighlight lang="text">
AT+RESTART
AT+RESET
AT+SET
AT+GETADDR
AT+GETIEEE
AT+GETFIEEE
</syntaxhighlight>

== Notes and version constraints ==
* The exact parameters for AT+SET are incompletely specified in the source; full configuration values should be verified before use.
* Using the CC debugger requires installing specific drivers; failures registering MSCOMM32.OCX on 64-bit systems require copying the file to SysWOW64 or System32.
* Compatibility with XBee modules other than the Core2530 (B) is not confirmed in the source and should be checked before deployment.

== Source and revision record ==
* [https://www.waveshare.com/wiki/XBee_USB_%20Adapter XBee USB Adapter - Waveshare Wiki]
* Source revision: 80480
* Captured: 2026-08-30T02:51:45+00:00
* SHA-256: <code>8fe5a8d5362e2b440ae000672b71388f907700fd3740292d2b4f7009763b7ba7</code>

WSAL11293 – XBee USB Adapter/en - Versionsgeschichte

JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex