JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

2026-09-05T22:28:35Z

Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex

Neue Seite

__NOINDEX__
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.

== Summary ==
The Pioneer600 is an all-in-one expansion board for the Raspberry Pi series and Jetson Nano. It integrates a standard 40-pin GPIO header, basic I/O components, USB-to-UART, an OLED display, RTC, ADC/DAC, GPIO expansion, IR remote control, and sensors via onboard interfaces.

== Related products at JW Tech ==
* [https://shop.jw-tech.eu/p/WSAL11179 WSAL11179 – Pioneer600, Raspberry Pi Expansion Board]

== Technical overview ==
* Standard Raspberry Pi 40-pin GPIO expansion header; compatible with the Raspberry Pi series and Jetson Nano.
* Onboard components include two LEDs, joystick, buzzer, CP2102 USB-to-UART chip, 0.96-inch OLED, DS3231 RTC with battery holder, PCF8591 (8-bit ADC/DAC), PCF8574 GPIO expander, LFN0038K IR receiver, BMP280 pressure sensor, and a 1-WIRE connection with DS18B20.
* Onboard interfaces listed: AD, DA, ONE-WIRE, RPi, USB TO UART.
* Driver libraries provided: BCM2835, WiringPi, lgpio, plus Python demo code.
* SPI, I2C, and UART are enabled via "sudo raspi-config" under Interfacing Options, followed by "sudo reboot".
* Demo code is downloaded from a Waveshare file server, extracted, and made executable with chmod 777.
* Available demos cover LED, key, PCF8574, PCF8591 (ADC/DAC), BMP280, DS3231, OLED, and various sensor demos (temperature, humidity, gas, UV, etc.).
* Certifications listed in source: CE and RoHS.

'''Commands and examples – verify before use:'''
<syntaxhighlight lang="text">
sudo raspi-config
sudo reboot
sudo wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.71.tar.gz
sudo tar zxvf bcm2835-1.71.tar.gz
cd bcm2835-1.71/
sudo ./configure && sudo make && sudo make check && sudo make install
sudo apt-get install wiringpi
wget https://files.waveshare.com/wiki/common/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.deb
gpio -v
sudo git clone https://github.com/WiringPi/WiringPi
cd WiringPi
sudo ./build
sudo su
wget https://github.com/joan2937/lg/archive/master.zip
unzip master.zip
cd lg-master
sudo make install
sudo apt-get update
sudo apt-get install python3-smbus
</syntaxhighlight>

== Notes and version constraints ==
* No battery included: For shipping reasons, the board ships without a CR1220 button cell; one must be installed manually for RTC operation.
* When using the Bullseye branch, replace "apt-get" with "apt"; this branch only supports Python 3.
* Under Bookworm, only the lgpio library is available; BCM2835 and WiringPi cannot be installed or used there.
* WiringPi version depends on installation path: older systems report gpio -v = 2.52, newer ones (post-May 2019) or Bullseye report 2.70. If the expected version does not appear, it indicates an installation error.
* Several demos require that the relevant interfaces (SPI, I2C, UART) were enabled beforehand and the machine was rebooted.
* Jetson Nano compatibility is mentioned but no specific wiring or command details are provided; verify before use.

== Source and revision record ==
* [https://www.waveshare.com/wiki/Pioneer600 Pioneer600 - Waveshare Wiki]
* Source revision: 69213
* Captured: 2026-08-30T02:49:33+00:00
* SHA-256: <code>d75e3aacea8dec462d2f82c4963771b1af6fb1db1320e14a5339882e01ddbb18</code>

WSAL11179 – Pioneer600/en - Versionsgeschichte

JWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex