https://wiki.jw-tech.eu/index.php?action=history&feed=atom&title=WSAL10703_%E2%80%93_RPi_Camera_%28H%29%2FenWSAL10703 – RPi Camera (H)/en - Versionsgeschichte2026-10-23T23:18:07ZVersionsgeschichte dieser Seite in JW Tech WikiMediaWiki 1.43.9https://wiki.jw-tech.eu/index.php?title=WSAL10703_%E2%80%93_RPi_Camera_(H)/en&diff=2038&oldid=prevJWTechPublisher: Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex2026-09-05T22:41:36Z<p>Freigegebene technische Dokumentation veröffentlicht; Text-only und noindex</p>
<p><b>Neue Seite</b></p><div>__NOINDEX__<br />
'''Documentation notice:''' This technical documentation was independently rewritten from an archived supplier source. Check technical details and commands against the product version and manufacturer documentation before use.<br />
<br />
== Summary ==<br />
Technical wiki for the Waveshare RPi Camera (H) with an OV5647 sensor (5 MP), fisheye lens, infrared night vision, and adjustable focus. The card connects to a Raspberry Pi board via the CSI port.<br />
<br />
== Related products at JW Tech ==<br />
* [https://shop.jw-tech.eu/p/WSAL10703 WSAL10703 – RPi Camera (H) for Raspberry Pi, OV5647, 5MP, Supports Infrared night vision, Adjustable Focus]<br />
<br />
== Technical overview ==<br />
* Sensor: OV5647, 5-megapixel resolution<br />
* Fisheye lens for a wider field of view<br />
* Supports infrared night vision; recommended IR LED wavelength: 850 nm<br />
* Adjustable focus; focal length approximately 10 cm to infinity<br />
* Connects via the CSI port; on Pi 5 two CSI ports are available<br />
* For non-official cameras, /boot/config.txt or /boot/firmware/config.txt must be adjusted<br />
* Use dtoverlay=ov5647 for the OV5647<br />
* Two cameras simultaneously: assign cam0/cam1 in config.txt<br />
<br />
'''Commands and examples – verify before use:''' <br />
<syntaxhighlight lang="text"><br />
sudo nano /boot/config.txt<br />
sudo nano /boot/firmware/config.txt<br />
dtoverlay=ov5647<br />
rpicam-hello<br />
rpicam-jpeg -o test.jpg<br />
rpicam-jpeg -o test.jpg -t 2000 --width 640 --height 480<br />
sudo libcamera-hello -t 0<br />
sudo libcamera-hello -t 0 --camera 0<br />
sudo libcamera-hello -t 0 --camera 1<br />
rpicam-hello --tuning-file /usr/share/libcamera/ipa/rpi/vc4/imx219_noir.json<br />
rpicam-hello --tuning-file /usr/share/libcamera/ipa/rpi/pisp/imx219_noir.json<br />
</syntaxhighlight><br />
<br />
== Notes and version constraints ==<br />
* The exact configuration of /boot/config.txt depends on the specific board type and OS version – verify before saving.<br />
* Using rpicam versus libcamera is version-sensitive; older systems may require libcamera.<br />
* The EN solder pad for controlling the IR LED is not fully documented; the exact GPIO choice requires manual confirmation.<br />
* Using IMX290 on a Pi 5 additionally requires downloading and copying a JSON file – this needs network connectivity.<br />
* Compatibility with Compute Module boards and exact pinout should be verified against the specific carrier board.<br />
<br />
== Source and revision record ==<br />
* [https://www.waveshare.com/wiki/RPi_Camera_(H) RPi Camera (H) - Waveshare Wiki]<br />
* Source revision: 89221<br />
* Captured: 2026-08-30T02:37:52+00:00<br />
* SHA-256: <code>243b4e536b0775d81ee66eaf569737dcef6a4c04a20bd2daa0e5e11506811640</code></div>JWTechPublisher